AVPro Edge's new encoder sends 4K and 1080p video from one source box
AVPro Edge's MXnet 10G-MSE encoder, available now, sends a 4K SDVoE stream and a 1080p H.265 stream from one video source.
This story was produced through MarketScale. See how Professional AV teams put it to work with Customer Stories & Case Studies.
Key takeaways
One encoder per source can now feed both premium 4K rooms and 1080p H.265 screens, shifting hybrid AV planning to which displays truly need uncompressed 4K/30 (and zero-latency genlock) versus the lower-bandwidth stream.
HDR10, HLG and Dolby Vision do not pass to the H.265 stream: any secondary display that needs HDR content belongs on the 10G SDVoE side of the system.
Zero latency on the 10G-MSE depends on genlock mode being active, which makes it a commissioning checklist item rather than a default.
Free workspace
Turn your Professional AV expertise into content.
Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.
One source, two pictures. AVPro Edge, a Sioux Falls, S.D., subsidiary of AVPro Global Holdings, has introduced the AC-MXNET-10G-MSE, a 10G multi-stream encoder that can transmit two streams onto the network simultaneously. The first is a 4K SDVoE stream for the company's MXnet 10G-TCVR decoders. It is uncompressed up to 4K at 30 frames per second and delivered with zero latency in genlock mode. The second is a low-bandwidth 1080p H.265 stream for MXnet USP decoders, which the company says can feed areas across facilities, lobbies or campuses. The MXnet 10G-MSE is available now.
Alyssa Borelli, covering the launch for Commercial Integrator, pointed out that most sites have no reason to deliver identical video quality to every room. A boardroom video wall or a surgical display needs uncompressed 4K with no lag. An overflow room or lobby screen across campus usually doesn't. Until now, she noted, serving both from one source often meant buying two encoders.
For whoever scopes the AV for a hospital, a university or a corporate campus, this is a planning story as much as a hardware one: they now have to decide, display by display, which side of the line each screen sits on. With the 10G-MSE, the costly choice in a hybrid AV design shifts from how many encoders to buy to which screens truly need uncompressed 4K.
What each stream carries
The SDVoE side is the premium tier. Video travels with no compression up to 4K/30fps. Above 30fps the encoder applies a 1.3:1 ratio, which the company describes as producing a signal almost identical to the source. Over SDVoE the encoder accepts up to 4K/60fps 4:4:4 8-bit YCbCr or RGB content, and it also handles 10- and 12-bit deep color formats, including HDR10, HLG and Dolby Vision.
That compression detail is worth reading closely. The zero-compression claim holds fully only to 30 frames per second; at 4K/60 the stream is lightly compressed. According to Commercial Integrator, spreadsheets, medical imaging, fine text and other detail-critical content hold up on primary displays.
The 10G endpoints are also equipped with control signal I/O, so integrators can route USB and control signals over the network through the MXnet API to control peripherals or create KVM matrix systems. Commercial Integrator said this adds value in operations centers, labs and control rooms, where staff working from multiple workstations need keyboard and mouse access to sources.
The 10G-MSE by the numbers
AVPro Edge; Commercial Integrator
The H.265 side runs at 1080p, is built for low-bandwidth distribution, and does not carry Dolby Vision, HDR or HLG. That makes HDR a property of the route rather than the source: an HDR feed shown on a 10G-TCVR display would not arrive in HDR on a USP screen. Commercial Integrator's advice is to flag this with clients early, because any secondary display that needs HDR content belongs on the 10G side of the system.
The zero-latency promise belongs to the 10G endpoints, and only when genlock mode is active. Commercial Integrator names surgical monitoring, live event switching and interactive presentations as the kind of time-sensitive work suited to that side of the encoder.
Latency is one factor in where a display belongs. If a screen needs zero latency, confirm genlock mode is part of the commissioning plan, because the claim depends on it.
Where the 1080p stream lands
The secondary stream feeds AVPro Edge's MXnet USP family, reaching those endpoints through AVPro Flow, the technology the company says enables interoperability across different products and manufacturers. The USP-PR and USP-PL handle 4K60 H.265/H.264 encoding; the entry-level USP-ES handles 1080p60 and is positioned for standard video distribution requirements. Each model includes a built-in digital signage player and multiview, with 16 windows on the USP-PR, seven on the USP-PL and four on the USP-ES.
The USP-PR adds a USB-C input with 60W power delivery and two-channel Dante and AES67 audio; the USP-PL shares the Dante and AES67 audio and adds USB HID extension. Those 4K60 figures describe what the USP units can encode themselves. The feed they receive from the 10G-MSE is the 1080p stream, which suggests that for MSE-fed screens the model choice turns more on multiview, signage, audio and USB features than on resolution.
AVPro Edge CTO Matt Murray told Installation the USP line is meant to let integrators and IT teams build anything from a single room to a large commercial network, including hardware from other vendors, with full interoperability across all models and support for standard H.265/H.264. Ahead of InfoComm 2026 in Las Vegas, the company described USP as its next-generation AV-over-IP ecosystem designed to create hybrid AV systems, built on AVPro Flow technology aimed at native interoperability with conferencing platforms, camera systems, recording and streaming solutions, and production equipment, according to Live Design.
AVPro Edge's own launch release, also carried by Live Design, frames the encoder as a way to bridge high-performance 10G systems with scalable IP streaming architectures. Read alongside the USP launches, that suggests a more specific role: the 10G-MSE as the link between AVPro Edge's two AV-over-IP families. A facility could keep SDVoE where image quality and timing matter most, then reach lobbies, hallways and outlying buildings through USP endpoints. For operators who already run SDVoE in a few premium rooms, that could mean less 10G infrastructure in secondary areas.
Commercial Integrator described the alternative it replaces: picking one AV-over-IP platform for an entire facility, or doubling up encoders to serve both. The 10G-MSE lets a designer match performance to each space from a single endpoint instead.
Sorting the room list
AVPro Edge pitches the encoder for corporate workplaces, higher education, medical sites, hospitality and live events. Its own split is specific: projectors, video walls and surgical monitoring on 4K SDVoE; lobbies and other secondary areas across facilities and campuses on the 1080p stream. Commercial Integrator's typical layout adds hallways and breakout spaces to that secondary list.
Commercial Integrator's suggested workflow follows from that. Begin by pinpointing which displays require 4K that is uncompressed and has zero latency, and send the rest over H.265. A bid with fewer encoders, and with less 10G infrastructure in secondary areas, can be more competitive without cutting quality where the client will notice. The company's case goes beyond the purchase order: by not duplicating sources, encoders or infrastructure, it says the design reduces installation costs and simplifies long-term maintenance.
The savings depend on the ratio, though. In a facility where most screens need HDR or genlocked timing, nearly every display ends up on the 10G side, and the secondary stream feeds very little. The design pays off most where a few rooms need premium video and many others need a reliable picture.
The warranty also bears on that math. AVPro Edge backs the unit with a ten-year advanced replacement warranty, under which a replacement ships before the failed unit comes back, which Commercial Integrator noted shortens downtime on client sites. For integrators carrying multi-year support agreements, the publication added, that lowers service risk on the projects where the encoder count matters most.
Questions before the bid
Before committing, project teams will still need to work out the network design for both streams. A few checks belong in the scoping meeting:
- Which displays need HDR10, HLG or Dolby Vision? Those need 10G-TCVR decoders, not USP endpoints.
- Which displays need zero latency, and does the commissioning plan put the 10G endpoints in genlock mode?
- Which USP model sits at each secondary screen, given that multiview window counts, signage, Dante audio and USB support differ across the USP-PR, USP-PL and USP-ES?
- How will the switch fabric carry a 4K SDVoE stream and a 1080p H.265 stream from every source? That is a question to put to AVPro Edge's engineers before the equipment list is final.
Sources
- AVPro Edge Introduces The MXnet 10G-MSE High-Performance, Multi-Stream AV Over IP Encoder ↗ · Live Design
- Introducing MXnet 10G-MSE High-Performance - Multi-Stream AV over ... ↗
- AVPro Edge's MXnet 10G-MSE Encoder Sends 4K SDVoE and H. ... ↗ · Commercial Integrator
- AVPro Edge launches new range of AVoIP transceivers ↗ · Installation
- AVPro Global Brands At The 2026 InfoComm Las Vegas Booth ... ↗ · Live Design
Featured companies
Your experts belong here
Every story in MarketScale Professional AV starts with a company putting its integrators, design engineers, and product specialists on the record. Buyers are already reading this topic. The only question is whose experts they find.
When a spec writer or facilities lead searches this category, your integrators are what they find instead of a competitor.
About the author
The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.