Skip to content
‹ Back to IndustriesEngineering & Construction

Blended cement is ready to sell, and public tenders decide how fast it spreads

A campaign co-sponsored by the Global Cement and Concrete Association wants public tenders to specify blended cement, because government buyers make up a big share of the infrastructure market. Those blends can cut carbon by up to half. The mixes already exist, so public-works specifications, building standards and contractor schedules now decide how fast they spread.

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

By MarketScale Newsroom · Blend Better CementGlobal Cement and Concrete AssociationBlended CementLow-carbon Concrete Procurement
Share
Blended cement is ready to sell, and public tenders decide how fast it spreads

Key takeaways

01

Blended cement that cuts carbon by up to half is already for sale, and what moves it at scale is a public tender that asks for it.

02

Before switching to a high-replacement mix, ask the supplier how fast it reaches strength. A delay of a few days changes a pour schedule, and some newer admixtures are designed to close that gap.

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

China alone will turn out 2 billion metric tons of concrete this year, according to Reuters, about four times the 490 million tons made by second-place India. The United Nations estimates that 75% of the infrastructure that will exist in 2050 has yet to be built. Cement and concrete already account for 8% of global carbon emissions, so the recipe for all that new building matters a lot.

That puts the pressure on a specific person: the public-works procurement lead who writes the concrete spec, and the contractor who has to price and pour against it.

Why the campaign starts with public tenders

The campaign is Blend Better Cement, run by the Intergovernmental Council for Buildings and Climate and launched at New York Climate Week. It asks governments to write blended cements into public-sector tenders and to update national building standards. At COP31, co-host Turkey formally joined, bringing the number of supporting countries to 14. They include Brazil, France, Germany, Italy, the UK and five African countries, among them Ethiopia, which hosts next year's COP.

New analysis released at COP31 argues that raising the share of blended materials in cement by 20 percentage points could cut annual global CO2 emissions by almost 2%. For a procurement lead, that frames the ask as a change in proportion within a product already on the market rather than a bet on a new category.

The campaign counts the Global Cement and Concrete Association (GCCA) among its sponsors. Diana Casey, the association's cement and ESG director, told Reuters that the industry could produce all the blended cement in the world and still fall short of its targets if no one buys it. She said government procurement accounts for a large part of the infrastructure market, and commitments from public buyers would give producers the confidence they need to invest. Blended cement that cuts carbon by up to half can already be bought. What gets it used at scale is a public tender that requires it.

Some of that purchasing is already under way, including in places that have not joined the campaign. New York State's Buy Green Concrete guidelines apply to every state contract and are now five years old. New York is also one of nine US states that call for lower embodied carbon in construction. Casey added that blends also make practical sense for producers outside the US. Calcined clay and other materials available locally can stand in for costly imported clinker, which reduces energy use and keeps jobs in the region.

Yuliya Kravtsov, chief executive of CarbonCure Technologies, said in an email to Reuters that specifying lower embodied carbon is becoming a business decision. In North America, she pointed to state buy-clean policies and to hyperscaler spending on data centers and warehouses as the drivers.

Cost, performance and constructability remain non-negotiable for concrete producers, she said. Even so, greener mixes are increasingly the cheaper option as producers find ways to use less of the expensive materials while keeping strength and durability. CarbonCure's own method injects CO2 into fresh concrete, where it mineralizes and stays locked in without affecting performance. The Canadian company recently delivered its 11 millionth truck of concrete made that way, which suggests the approach has moved well beyond pilot pours into routine ready-mix deliveries.

For an operator weighing whether this is about them, the condition is simple. Teams that bid on state work in a buy-clean state, or supply concrete to data center and warehouse builders, are already inside the demand signal Kravtsov describes. Everyone else is waiting to see whether the 14 campaign countries rewrite their tender documents.

What replaces clinker, and what it costs on site

Clinker is the target because the World Resources Institute attributes roughly 90% of cement's emissions to producing it. Heating limestone releases CO2 from the rock itself: each 100 kg of pure limestone fully calcined gives off about 44 kg of CO2, whatever fuel heats the kiln.

The traditional substitutes are running short. Fragkoulis Kanavaris, global lead in concrete materials and decarbonization at Arup, told Reuters that blends are a transition technology for the sector, especially as fly ash and ground granulated blast-furnace slag (GGBS) start to run out. Calcined clay is one answer. Arup recently finished a tunnel on the UK's HS2 high-speed rail project using concrete made from calcined clay dug out of the site's own spoil heap, which also avoided quarrying virgin clay.

The best-known calcined clay product is LC3, or Limestone Calcined Clay Cement, which combines clinker with calcined clay and limestone. RMI reports it can cut emissions by up to 40% compared with ordinary Portland cement (OPC). India has published a dedicated LC3 standard, IS 18189:2023, and commercial production has begun in parts of the country, according to RMI. A product with its own national standard is far easier to name in a tender than one that has to be argued through as an exception.

Calcined clay still has to go through a kiln, though at lower temperatures and for shorter times than OPC, so some emissions remain. That is why the industry is returning to something as old-fashioned as grinding. Intensive grinding, or mechanical activation, can turn inert materials such as clay into fine particles that replace up to 50% of OPC in a concrete mix.

It works on industrial waste too, including red mud left over from aluminum production. Kanavaris sees industrial-scale grinding as a clearer way to bring electricity into cement production than electric kilns, which are still on the drawing board. Arup is also applying it to what it calls urban mining, harvesting material from demolition sites. Rather than crushing old concrete into coarse aggregate, grinding turns it into recycled fines that can stand in for OPC.

Chemistry pushes replacement further. UK-based Material Evolution uses alkali fusion to activate the binder without high heat, which founder Liz Gilligan says lets supplementary cementitious materials replace as much as 95% of the OPC and cuts CO2 by around 80%. Ireland's Ecocem says its technology has shown reductions of up to 70%.

Reported CO2 cuts by route

Up to 50%
Blended cements vs Portland cement (Blend Better Cement campaign)
Up to 40%
LC3 vs ordinary Portland cement (RMI)
Up to 70%
Ecocem technology, demonstrated reductions
Around 80%
Material Evolution alkali fusion, replacing up to 95% of OPC

Reuters; RMI via Green Jams

These figures come from different parties measuring different products, so they show how far each route reaches rather than settling a head-to-head ranking. What they share is the lever: every one of them works by putting less clinker into the binder.

The problem appears on the job site. Mixes with a high share of supplementary materials gain strength more slowly than Portland cement, so contractors may have to wait a few extra days before they can use them. Gilligan says Material Evolution's admixture sets off a reaction in the supplementary materials, and the result is concrete that reaches the same strength in the same time as a mix that depends more on OPC. "There's no silver bullet in this space," she added. In her view, solving a problem this large will take many different pieces working together.

Supply chains need work as well. RMI found that ready-mix plants taking on LC3 need new silos and new quality-control processes, that supply can be unreliable, and that mix designs were still being developed. For a contractor, that puts the producer's plant readiness on the same checklist as the mix's carbon figure.

Before accepting a high-replacement mix on a schedule-critical pour, ask the supplier for strength-gain data at the ages your formwork plan depends on, not only the 28-day result. That tells you whether a few days of delay are already designed out.

Standards and carbon prices set the pace in Europe

Donal O'Riain, CEO of Ecocem, told Reuters that regulators have a critical role in clearing the path. The EU Emissions Trading System is designed to raise the cost of carbon-intensive cement and steer investment toward lower-carbon technologies. A European Commission proposal to extend free carbon allowances has raised concern that it could weaken that price. O'Riain sees an opportunity in it, though. Starting in 2031, companies will qualify for free allocation only if they have credible decarbonization plans, make investments and achieve significant emissions cuts. He said that if the change is handled properly, it will lead to fast adoption of new low-carbon solutions.

His other ask is on standards. Cement is rightly held to strict safety and performance rules, he said, but those rules change more slowly than the technology, and a cement that meets performance requirements with far lower emissions needs a route to market. That is the European version of the problem the tender campaign is trying to solve: a product can be ready and still be locked out by the documents buyers are allowed to cite.

The industry body's own list of asks runs along the same lines. At COP31, the GCCA published its Cement and Concrete Industry Net Zero Action and Progress Report 2026/27, Sustainability Online reported. It sets out pathways through carbon capture, alternative fuels, lower-carbon cement and circular economy solutions, and tracks progress against the association's 2050 Net Zero Roadmap, launched five years ago.

The report names standards reform, wider low-carbon procurement, use of waste-derived fuels in kilns, carbon pricing and support for carbon capture infrastructure as places where governments can speed things up. GCCA chief executive Thomas Guillot said many of the technologies needed are already available and now need putting into practice. That matches the logic of the tender campaign. The supply side is ready to sell; it is waiting for permission and orders.

The kiln still matters

Blends have a limit, and it is worth stating plainly. They reduce how much clinker goes into each ton, but every ton of clinker that remains still releases CO2 from calcination and still needs extreme heat. A procurement policy that only pushes blends leaves both of those sources untouched for the clinker that is still made.

The two sources are of different size. Citing the Global Carbon Project, Green Jams puts cement's chemical process emissions at about 1.5 billion tonnes of CO2 in 2024, with roughly another 0.9 billion tonnes from fuels burned to heat kilns. Cleaner heat can only reach the smaller figure; the larger one needs less clinker or carbon capture.

That is why kiln-side work is moving alongside the blending push. Holcim plans to install two heat batteries from Electrified Thermal Solutions, an MIT spin-out, at one of its cement plants, as Canary Media first reported and WAMC's Earth Wise program described. The batteries run electricity through insulated stacks of metal-oxide firebricks during off-peak hours, when wind, solar and other carbon-free power is often most abundant, then blow the stored heat straight into the plant's equipment. Rival Rondo Energy takes a different route, making superhot steam to drive a turbine that generates electricity for the plant, and nearly two dozen startups are working on clean industrial heat.

Electric heat ties a plant's economics to the power market. In Germany, Montel modelling commissioned by the Greens' parliamentary group found that the average wholesale power price from October 2026 to February 2027 could reach just over €166 per megawatt-hour, from around €99, about 68% higher than at last winter's gas prices, because gas plants often set the winter price. More wind and solar reduces that effect, which suggests off-peak charging matters to a heat battery's business case as much as to its emissions case.

Air Liquide, which centers its cement offer on oxygen, hydrogen and carbon capture, works inside the kiln itself. Cement making heats limestone, clay and other materials above 1,400 degrees, and small quantities of oxygen and hydrogen injected into the rotary kiln concentrate thermal energy, making it easier to switch from fossil fuels to alternative fuels with a high biogenic carbon content. The company says that approach can reduce overall CO2 emissions by up to 20% while keeping cement output consistent.

For the calcination share, it offers its Cryocap Oxy technology, which captures CO2 directly from the concentrated flue gases at the outlet of the process. The gas is cooled to very low temperatures, cleaned of impurities and pressurized into a liquid that can be transported, then stored or upcycled into new materials.

The signal worth watching is in tender documents rather than at summits. In Europe, the 2031 link between free allowances and decarbonization plans is the next fixed date on the calendar.

Featured companies

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.

About the author

MarketScale Newsroom
MarketScale NewsroomEditorial Team, MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Jacobs and TYLin get up to $150M to help Washington's airports manage overlapping builds

Jacobs and TYLin get up to $150M to help Washington's airports manage overlapping builds

The Metropolitan Washington Airports Authority hired Jacobs and TYLin under task-order contracts capped at $150 million over five years, expandable to $300 million over 10. The authority is paying for extra staff to handle overlapping work. Dulles' Package T tunnels must fit with three other construction packages, while Reagan National's Terminal 1 procurement runs in parallel.

  • 01Washington's airport authority secured up to $150 million of outside program management before Dulles' Package T tunnel work has been solicited, because it expects simultaneous projects to exceed its own staff and existing contractors.
  • 02Even at its full 10-year, $300 million ceiling, the oversight pool serves a Dulles redevelopment valued at more than $20 billion, and it also covers Reagan National.
  • 03The first task orders will show whether Jacobs mainly leads Package T or provides staff across both airports. Package T responses are due Nov. 23 and Reagan National construction manager at-risk proposals are due Dec. 7.

Nov 19, 2026

Autodesk Forma's November update lets admins assign project access through Autodesk Assistant

Autodesk Forma's November update lets admins assign project access through Autodesk Assistant

Autodesk's November Forma release includes construction updates, many of them useful to administrators running large project portfolios. Administrators can add existing hub members to multiple projects through Autodesk Assistant and push template updates to hubs that already have them. Closeout gets handover exports filtered by location.

  • 01Authorized Forma administrators can add existing hub members to multiple projects through Autodesk Assistant on manage.autodesk.com. The feature is initially available to eligible customers with projects hosted on US servers.
  • 02Forma can automatically map Revit levels and areas into the Location Breakdown Structure, and handover exports can be filtered by Location—so teams that set up Locations early may be able to reuse that structure to organize closeout packages.
  • 03Assistant's new PDF reading takes one file at a time, up to 4.5 MB, and keeps it out of the project record. Any answer the project needs on file still has to be saved there by hand.

Nov 18, 2026

About half of mechanical contractors rate BIM-to-shop links highly

About half of mechanical contractors rate BIM-to-shop links highly

Nearly all mechanical contractors that use BIM already model, and 86% have linked BIM to fabrication software. Only about half say that link works well. MSUITE's workflow guide proposes dated work packages, with need dates taken from the field's install sequence and field issues sent back to VDC tied to each package. The reason: fabrication lead times run three to six weeks, install sequences change routinely, and the shop can be the last to hear.

  • 01Nearly every mechanical contractor already models; the weak point is the wire to the shop, which 86% have installed and only about half say works well.
  • 02The next gap sits one link further down: only 35% of contractors say their BIM and fabrication links to ERP and project management systems work well.

Nov 18, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

About the Expert

MarketScale Newsroom
MarketScale Newsroom

Editorial Team

MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512