Autodesk Forma's November update lets admins assign project access through Autodesk Assistant
Autodesk's November Forma release includes construction updates, many of them useful to administrators running large project portfolios. Administrators can add existing hub members to multiple projects through Autodesk Assistant and push template updates to hubs that already have them. Closeout gets handover exports filtered by location.
This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.
Key takeaways
Authorized Forma administrators can add existing hub members to multiple projects through Autodesk Assistant on manage.autodesk.com. The feature is initially available to eligible customers with projects hosted on US servers.
Forma can automatically map Revit levels and areas into the Location Breakdown Structure, and handover exports can be filtered by Location—so teams that set up Locations early may be able to reuse that structure to organize closeout packages.
Assistant's new PDF reading takes one file at a time, up to 4.5 MB, and keeps it out of the project record. Any answer the project needs on file still has to be saved there by hand.
Free workspace
Turn your Engineering & Construction expertise into content.
Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.
Authorized administrators can now describe a group of people and a group of projects to Autodesk Assistant and add existing hub members to multiple Forma projects. The feature is initially available to eligible customers with projects hosted on US servers. It is one of more than 60 construction product updates in Autodesk's November 16 release.
The AI items will get the attention. Autodesk Assistant now draws charts and reads PDFs. For anyone who keeps a large project portfolio consistent, though, the more useful changes are further down the list. That's the person this release serves first.
Access and audit across the hub
Autodesk now offers a conversational route to project access. Authorized administrators can describe the people and projects in plain language to Autodesk Assistant on manage.autodesk.com and review the results there. The feature starts with eligible customers whose projects sit on US servers, and access varies by subscription. For admins who handle recurring project access assignments, that could cut repetitive setup work.
A smaller change works at the level of a single assignment. A new Recents section at the top of Forma's member picker lists the members, roles and companies a user has recently selected, so assigning familiar people and groups across project workflows takes less searching and scrolling. Between the two, the Assistant handles access in bulk across projects, while Recents trims the clicks for assignments made inside a project's own workflows.
Review the hub member list before using the new Assistant feature. It adds existing hub members to multiple projects, so a clean starting list could make the results easier to check in the Assistant.
From Revit levels to the owner's package
Standards are hard to keep when every project starts as a copy of last year's copy. Admins can now push updates from a project template to selected hubs that already have it, and Forma keeps a history of earlier shared versions. Hub administrators can also mark Meeting Templates to be added automatically to every new project by enabling Auto-add to projects for selected templates in the Hub Library. Together, the two changes cover both ends of a standard's life: what a new project starts with, and how existing hubs catch up when the standard changes.
Location setup got faster too. When an RVT file is imported, Forma can map its levels and areas to the Location Breakdown Structure and create matching boundaries automatically, so nobody has to rebuild the building's floors by hand. A Copy Paste Area tool moves existing Location areas from one sheet to another.
That matters again at the end of the job. Handover exports can now be filtered by Location, so an admin can build a package for one building, floor or area that holds only the relevant Assets, Forms, Issues, RFIs and Photos. Autodesk frames the filter as a way to organize deliverables around owner and stakeholder requirements.
Projects still on the legacy Photos 1.0 experience can include those photos in handover exports without migrating first, exporting all photos from those projects, while projects on the new Photos experience can still export all photos or selected albums. Photos also move more easily during the job. Through Bridge, teams can now share photos, videos and albums from one Forma project to another, where they land in the destination project's Photos tool without downloading and re-uploading files.
For teams that map Locations from the Revit model at setup, the same structure could later organize the owner's handover package.
The stakes for closeout tooling are real. When Autodesk added Handover to what was then Autodesk Construction Cloud in March 2025, For Construction Pros described a closeout process averaging 284 days, with another 247 days from final payment to internal closeout, or 531 days in all. The same report put the loss at roughly 30% of the data created during design and construction by the time a project closes out. Handover, as described then, compiles project information and exports it as a shareable zip file for clients and owners. November's changes refine what goes into that file and how it is sliced.
The new Closeout Dashboard in Insight Builder works from submittal data. It tracks closeout progress, overdue items and which contractors are supplying their documents, with views by status, type and contractor. For a team staring down a closeout measured in months, that puts the question of who still owes documents in one view rather than in a spreadsheet chase.
One tradeoff: Handover now allows three exports to run at once per project and alerts users when they hit that limit. Admins can cancel running exports from the Export Log, which now shows clearer statuses. On a multi-building job cut into many location packages, the teams preparing turnover will have to decide which packages run first.
Where Assistant fits, and on which tier
Assistant's two new features are useful and clearly bounded. Asked about project data, it now returns a written summary, a table of counts, and a bar, line or pie chart. Autodesk suggests using it for issue trends, RFI status, workload distribution and submittal progress.
It also accepts PDF attachments for summarizing, pulling out information, checking a document against requirements or cross-referencing documentation, alongside Forma project data, with follow-up questions in the same chat. The limits: one PDF at a time, up to 4.5 MB, and the file stays in the chat rather than being saved to the project. If an answer needs to be on the record, someone still has to file it.
The PDF feature widens where Assistant started. At its March 2025 launch, For Construction Pros described it as a tool for searching and summarizing published project specifications, with highlighted, clickable references back to the source document. Attaching a PDF extends that to documents a user brings into the conversation, which suggests the specification use case was the first step rather than the whole design.
The subscription tier decides who gets these features. In a November 10 comparison on the same blog, Autodesk's Adam Arcus explains that Forma Build Essentials covers field issue capture, forms, photos, sheets, models and daily reports, and suits specialty contractors, smaller general contractors and field crews. Forma Build adds RFIs, cost and schedule workflows, Construction IQ reporting and Autodesk AI features such as Assistant and AI-powered Quick Issue Creation, with AI access depending on subscription type.
November's update to Issues lets teams add Plan Tasks and Reviews as Issues references. It also brings saved filters, plus quick filters for open, assigned and overdue items, to the mobile app. Filters built on the web now carry into the field, so a superintendent doesn't have to rebuild the same criteria on a phone. Forma Build users also get a more configurable Project Home with partner cards.
In Autodesk's worked example, a pipe route conflicts with a beam. The Issue records the field condition and the fix. If the design is unclear, Forma Build lets the project engineer create a linked RFI for the formal question and answer. Creating an Issue does not automatically update cost or schedule.
One limit on what these AI features cover: in a buyer's guide, Trunk Tools, which sells its own drawing and bulletin review agent, describes Forma as managing the drawing set through Autodesk Docs with version history and an audit trail. The guide treats reading what changed between drawing revisions as a separate category of tool, and describes Autodesk's AI tooling as limited mostly to the Assistant. Teams that need revision comparison should plan to evaluate it as a separate layer, which is how the guide says most project stacks are built anyway.
The guide's own buying questions are a fair filter for that evaluation. Does the review tool work with the drawing set already managed in Procore or Autodesk Forma, or does it require re-uploading and reorganizing it? And is its AI built for preconstruction design coordination or for construction-phase bulletin and revision review, which the guide calls different jobs on different timelines?
Revit models and the integration layer
The integration layer moved as well. Forma Construction Connect added Copilot for writing recipes and Intelligent Document Processing for extracting data from content passing through integration workflows. Reviews are now prebuilt connector actions, the connector's interface and branding were updated for Forma, and Autodesk lists streaming of large files as coming soon.
Partner integrations are where Revit versions start to matter. A day after Autodesk's release, on November 17, Esri's Geoff Cook and Nora Nanov announced that ArcGIS GeoBIM in ArcGIS Enterprise 12.2 supports Revit 2026 and 2027 models in 2D and 3D views. Revit 2026 support had arrived for 2D views in Enterprise 12.1; 12.2 adds 3D and full Revit 2027 support. Creating GeoBIM projects requires a Creator, Professional or Professional Plus ArcGIS user type along with Forma licensing.
The same release added pre-sync and post-sync reports and a dedicated "3D ArcGIS" Revit view that controls which content syncs from Forma. The pre-sync report checks georeferencing and coordinate system information before a sync runs, and IFC files now georeference more consistently across IFC versions. For firms that connect Forma to GIS or other systems with version-specific support, knowing which Revit version each project uses could matter more over time.
The "3D ArcGIS" view and Forma's new RVT-to-Location mapping share a premise: how the Revit model is set up shapes what the next tool receives. That suggests the model team's setup choices, such as clean levels and areas or a GIS-ready view, now pay off in more than one downstream workflow.
Autodesk named Diana Colella executive vice president of its AEC business, its largest industry business, on October 6, with a stated mandate to connect desktop products such as Revit and Civil 3D more closely to Forma workflows. Autodesk said Amy Bunszel, her predecessor, would remain with the company through November 2, 2026, to support the transition. Colella said her priority is to make sure the work across Forma and AI "translates into meaningful improvements in how projects are designed, built and operated."
Read against that mandate, November's RVT-to-Location mapping is a small, concrete case of desktop model data feeding a Forma workflow. The next marker to watch is whether the Assistant-based member assignment expands beyond US-hosted projects.
Sources
- November Autodesk Forma Construction Releases – Built for What’s Next ↗
- From Jobsite Issues to Broader Project Management - Digital Builder ↗
- Autodesk names Diana Colella to lead architecture, engineering and ... ↗ · PR Newswire
- What's New with ArcGIS GeoBIM in ArcGIS Enterprise 12.2 (November ... ↗
- Best construction drawing management software (2026) ↗
Featured companies
Your experts belong here
Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.
Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.
About the author
The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.