Skip to content
‹ Back to IndustriesRetail

Checkmark: SmartShrink cap-band halves handheld liquid counts in Gen2X test

Checkpoint Systems' SmartShrink puts an RFID inlay inside the shrink band on a bottle cap, using Impinj M800 chips. In Checkpoint's test of about 50 one-gallon containers, Gen2X readers cut full-count time from 10.6 to 5.1 seconds. Store readers decide the speed.

This story was produced through MarketScale. See how Retail teams put it to work with Sales Enablement.

By MarketScale Newsroom · Checkpoint SmartshrinkImpinj Gen2xImpinj M800Zebra Technologies
Share
Checkmark: SmartShrink cap-band halves handheld liquid counts in Gen2X test

Key takeaways

01

SmartShrink gets the tag onto the bottle at the capping line, while the halved count time depends on Gen2X readers in the store, and two different companies make those two decisions.

02

Gen2X-capable cap tags still reached every container on a standard Gen2 reader, only slower, so a supplier tagging now gets full reads today and faster counts as store readers are upgraded.

03

Before a line trial, confirm which reader models a retailer uses and whether they support/enable Gen2X—Checkpoint’s handheld test on ~50 one-gallon containers fell from 10.6s (Gen2) to 5.1s (Gen2X), but results may vary by device and setup.

Free workspace

Turn your Retail expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

Around 50 one-gallon liquid containers, each with an RFID band around its cap, took 10.6 seconds to count completely with a handheld reader running the standard Gen2 protocol. With the reader on Impinj's Gen2X, the same full count took 5.1 seconds.

Those figures come from Checkpoint Systems' testing of SmartShrink, a cap-mounted tag built on Impinj M800 series chips. Impinj published the results on November 19 and put out the announcement as a press release the same day, and Label & Narrow Web editor Greg Hrinya covered it. The product goes after the aisle where item-level RFID has had the hardest time. As Impinj describes it, liquids absorb radio energy, the containers are often curved, and they tend to sit on metal shelves that interfere with the signal.

For a health and beauty or home care brand facing retailer tagging requirements, the useful detail is how the gain splits. SmartShrink gets the tag onto the bottle at the capping line, while the halved count time depends on Gen2X readers in the store, and two different companies make those two decisions.

Why the tag rides on the cap

SmartShrink builds the inlay into a shrink band that's applied during filling and capping, so the tag ends up on the cap and not on the label wrapped around the liquid. Checkpoint presents this as a way to add RFID without redesigning the label. Artwork, regulatory copy and label stock can all stay the same. The company lists a wide range of target categories: health and beauty, food and beverage, pharmaceuticals, home care, home improvement, garden and automotive.

The chip is the other half of the design. Impinj files the announcement under its M830 and M850 endpoint ICs. Both chips appear in Checkpoint's online inlay catalog, which describes the matching inlays as compliant with the industry-standard Gen2v2 protocol and also supporting Gen2X. In practice, the tags talk to any standard reader and switch to the Gen2X extensions when the reader has them.

The test bears this out. The plain Gen2 reader still picked up every container. It just took roughly twice as long. So the tag decision carries little risk: a supplier that applies Gen2X-capable bands now gets full reads on today's readers and faster counts as stores upgrade.

What the two tests measured

Checkpoint ran two tests. The first was a close-range handheld count using an E Family handheld reader with Gen2X support. The second was stationary: how many tagged items a reader picks up within five seconds from one meter away. Impinj adds that Gen2X improved accuracy at every read distance tested, not only at one meter.

SmartShrink on liquids, Gen2 versus Gen2X

52%
Less time for a handheld to count every container once Gen2X was on
74%
Share of tagged items read in five seconds at one meter on standard Gen2
89%
Share read in the same five-second, one-meter test with Gen2X
About 50
One-gallon liquid containers in the handheld test

Impinj; Checkpoint Systems testing

Impinj puts the handheld result in labor terms: shorter stock checks, and less time an associate has to hold the reader in one spot. The stationary result matters more for fixed and overhead readers. Going from 74% to 89% in five seconds is a 15-point gain by simple subtraction, so fewer items get missed in a single pass. It also means 11% of items were still unread at the five-second mark, which is worth remembering when a fixed reader only gets a short window.

The test does have limits. Checkpoint ran it on its own product, using one-gallon containers, which are much bigger than many health and beauty items. The published results don't cover small bottles packed tightly on metal shelving, even though Impinj lists small tags and dense packing among the conditions Gen2X is built for.

The reader half of the gain

The store side is moving too. RFID Journal's James Hickey reported on October 1 that Zebra Technologies is adding Gen2X support across its handhelds, sleds and fixed readers. Zebra announced the move at the RAIN in Action Summit and is rolling Gen2X across its RFID lineup through firmware upgrades. Impinj executive vice president Gahan Richardson noted that Zebra was the first company to license Gen2X. Zebra said these devices support it now:

  • Handhelds: MC33 family, TC22R, TC501, TC701
  • Sleds: RFD40 family, RFD90 family
  • Fixed and overhead readers: FXR90, FX9600, FX7500, ATR7000

For a store operations team, that changes what it costs to get the faster counts. If the fleet already includes these models, Gen2X is a firmware update on hardware the company already owns. If it doesn't, cap-tagged products still read, just at Gen2 speed. One caution: Checkpoint's published numbers came from an E Family handheld, so the same figures haven't been published for Zebra devices.

Retail tagging reaches the liquids aisle

Impinj ties the launch directly to retailers, Walmart among them, expanding RAIN RFID into more product categories. As those programs grow, suppliers need tags that work on a wider range of products. Louis Parker, RFID market development manager at Checkpoint, describes SmartShrink as a way to meet retail tagging mandates without disrupting production, especially for products that have been hardest to tag.

Smithers sees the same direction in its report From Shelf to System, written for Packaging Innovations & Empack 2027 and covered by Label & Narrow Web's Steve Katz. The report points to Walmart deploying Avery Dennison RFID in fresh food to improve inventory accuracy and cut waste. In its track-and-trace analysis, Smithers forecasts RFID growing 11.6% a year and passing $1 billion by 2030. Taken together, fresh food and liquids suggest that retailers are now bringing into RFID programs the categories that physics used to keep out. Zebra's announcement makes the same point, naming grocery, health and beauty, and pharmaceuticals as categories that used to be hard to tag and are now being added.

Before you commit a capping line, ask each retail customer which reader models its stores use and whether Gen2X is turned on. That tells you whether your products will be counted in the 10.6-second or the 5.1-second range.

Some questions belong in any supplier trial. Can the shrink band be applied at current line speeds on the filling and capping equipment already in place? How do reads hold up on the brand's own container sizes and fill levels, on the kind of shelving its retailers actually use? And does the inlay chosen match the protocol listings retailers ask for? Checkpoint's inlay finder lets buyers filter by chip, protocol and compatible reader type, which makes that last check quick.

The next signal to watch is store-level data. Until a retailer publishes results from tagged liquids on its own shelves, the 52% figure describes Checkpoint's controlled test on gallon containers, which is a strong benchmark for a supplier to set against its own trial.

Featured companies

Your experts belong here

Every story in MarketScale Retail starts with a company putting its merchandising leads, store operations teams, and category managers on the record. Buyers are already reading this topic. The only question is whose experts they find.

Category buyers trust operators, so your merchandising leads shorten the distance between first search and first call.

Book DemoSee how it works15 minutes, straight to a calendar.

About the author

MarketScale Newsroom
MarketScale NewsroomEditorial Team, MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

B2B Weekly

The week in Retail, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Retail: are you visible to AI?

Before they reach out, Retail buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Retail expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your merchandising leads, store operations teams, and category managers into the articles, video, and social content Retail buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Retail Insights

Walmart earnings highlight store-fulfilled delivery ahead of holidays

Walmart earnings highlight store-fulfilled delivery ahead of holidays

Walmart reported 23% growth in U.S. eCommerce sales and raised its fiscal 2027 outlook. This analysis examines the store-fulfilled delivery activity behind that growth and the need to measure fulfillment costs alongside service speed.

  • 01Walmart reported 23% U.S. eCommerce growth, with store-fulfilled delivery growing more than 40%.
  • 02Comparable sales include online activity; those figures do not isolate store and online profitability.
  • 03Retail operators can use fulfillment cost per order and service measures to assess faster-delivery promises.

Nov 19, 2026

Sally Beauty heads into a 100-store Ignited rollout with two-week remodels

Sally Beauty heads into a 100-store Ignited rollout with two-week remodels

Sally Beauty plans about 100 more Sally Ignited stores in fiscal 2027, reaching roughly 180. Remodel closures fell from eight weeks to two. Ignited test stores post 8% to 10% comparable growth, near Sally's roughly 10% two-year return hurdle, which decides whether a later 200-a-year pace happens.

  • 01Cutting remodel closures from eight weeks to two changes what a 200-store year costs before a single converted store earns its lift.
  • 02Watch the fiscal second quarter: L.A. Girl cosmetics move from 40 Ignited test stores to the whole Sally chain, an early marker of whether Ignited is working as a testing ground for the rest of the fleet.

Nov 19, 2026

Target’s most reworked snack, candy and drink aisles grew nearly 10%

Target’s most reworked snack, candy and drink aisles grew nearly 10%

Target added more than 2,000 food and beverage items in its third quarter, 40% more than a year earlier. Its most-reworked aisles grew nearly 10%. Snacks, candy and beverages outpaced the department's nearly 7% gain, suggesting new items pull shoppers in more often and making Target a widening shelf for emerging food brands.

  • 01Target is adding more than 2,000 food items in a single quarter while cutting apparel variety by about 20%. Target is deciding how many products to carry one category at a time, so a food supplier's pitch should be built around discovery, not around filling space.

Nov 19, 2026

Explore More Retail Insights

Read more expert perspectives from across Retail.

Browse Retail Hub

About the Expert

MarketScale Newsroom
MarketScale Newsroom

Editorial Team

MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Retail and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512