Skip to content
‹ Back to IndustriesEngineering & Construction

THE U.S. ARMED FORCES TRUST PRESCO FOR MISSION-CRITICAL TEXTILE PRODUCTS

The United States Armed Forces is responsible for protecting America and its interests around the world. Fulfilling this monumental task requires the dedication of trained service members, and the hard work of numerous Department of Defense (DoD) agencies including the Defense Logistics Agency, which procures the clothing and textiles that support the troops. It’s estimated…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

·
Share
THE U.S. ARMED FORCES TRUST PRESCO FOR MISSION-CRITICAL TEXTILE PRODUCTS

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

The United States Armed Forces is responsible for protecting America and its interests around the world. Fulfilling this monumental task requires the dedication of trained service members, and the hard work of numerous Department of Defense (DoD) agencies including the Defense Logistics Agency, which procures the clothing and textiles that support the troops. It’s estimated the DoD purchases over 8,000 different textile items annually; when individual sizes are factored in, the figure jumps to more than 31,000 line items.[1]

When equipping our nation’s military, not just any textiles will do. The DoD has specific performance standards to ensure America’s troops are supported by the best materials available to better protect service members from harm. Military films that make up uniforms and field gear such as tents have requirements for specialized infrared pigments that can conceal what lies beneath the material from sensors, hiding potential targets from enemy aircraft. Not all suppliers are able to provide the strict color tolerances and infrared performance standards the military demands of its materials, but Presco is an expert in meeting the rigorous requirements of America’s Armed Forces.

Over the last decade, Presco has accumulated unrivaled expertise in military vinyl formulations, which is why the DoD relies on mission-critical field gear made with Presco’s Pres-Flex Military Film to help our troops safely fulfill their missions. Satisfying the stringent demands of the U.S. Military has driven us to engineer advanced formulations that raises the bar of our color consistency capabilities. Our formulations are able to hold a 1.0 – .5 dE color variance specification for many colors set forth in the Federal Standard 595C catalog. We have the ability to hold tight color tolerances on all our military formulations, and our Pres-Flex Military Film contains the desired infrared pigment that promotes concealment and safety when sheltered by the technology.

We trust our service members with the defense of our nation, and the DoD trusts us to manufacture films to the specifications needed to protect the lives of American soldiers. To enhance our offerings, we offer customized formulations of our Pres-Flex Military Film that include heavy metal free, flame retardant, low temperature tolerance and anti-microbials options. All formulations are subject to minimums and lead times. Presco’s Pres-Flex Military Film is manufactured in America, and specifically designed to protect the brave men and women fighting on the front lines. Click here to learn more about our custom formulations.

Read more at pres-flex.com

[1] http://www.ncto.org/facts-figures/textiles-and-our-military/

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Why Momentive says city data centers need sealant built for 1,000-foot towers

Why Momentive says city data centers need sealant built for 1,000-foot towers

Planners are pushing urban data centers toward glass facades. Bull argues high-load structural silicone glazing—like the 30 psi UltraGlaze SSG4600 used on Austin’s 1,025-foot Waterline tower—can help support heavier security glass and tighter enclosure performance in new multi-story builds.

  • 01When a city insists a data center look like an office building, the sealant holding the glass ends up doing work for the cooling plant.
  • 02Rifle-rated UL 752 Level 7 glazing runs about 15 pounds per square foot, so the security rating and the sealant's 30 psi design strength belong in the same specification review.
  • 03The supertall-sealant case applies mainly to new urban builds; most operating U.S. data centers can't shut down for facade replacement and harden their glass through retrofit shields instead.

Nov 13, 2026

IndexBox sees panelized buildings growing 5.3% a year if panel plants keep up

IndexBox sees panelized buildings growing 5.3% a year if panel plants keep up

IndexBox forecasts the global panelized buildings market to grow 5.3% a year from 2026 to 2035, with residential housing at about 45% of 2026 demand. Factory capacity is the catch. Limited mass timber and specialized steel framing capacity will hold growth back in some regions, and IndexBox expects investment in new plants and automation to ease those bottlenecks by the late 2020s.

  • 01Panels swap scarce framing crews for factory hours, and through the late 2020s the factory hours for mass timber and specialized steel framing are scarce too.
  • 02Housing is 45% of panelized demand, but commercial and institutional projects are expected to grow faster because owners are paying for schedule certainty; warehouse and campus owners are closest to that shift.
  • 03Mid-scale volumetric modular plants are estimated to need 60% to 70% utilization to break even; panel lines use different equipment, but the report argues the same fixed-cost logic can make order-book visibility important before adding shifts or lines.

Nov 11, 2026

Requests for Paebbl's carbon-storing cement substitute far outstrip what it can produce

Requests for Paebbl's carbon-storing cement substitute far outstrip what it can produce

Rebond 300 replaces up to 30% of cement in concrete with no equipment changes. In a Holcim and Goldbeck floor slab trial at C30/37, its workability, setting time and finishing matched the reference mix. Demand exceeds what Paebbl can produce, and closing that gap is now its main challenge.

  • 01After Rebond 300 runs through a standard ready-mix plant and hits C30/37 with no schedule change, buyers’ next questions shift to supply and allocation—how many tonnes Paebbl can ship—alongside price and how much of the mix to commit.
  • 02If Rebond 300 displaces up to 30% of cement yet can cut embodied carbon by up to 40%, the figures imply a negative footprint beyond simple substitution; Paebbl cites a verified -149 kg CO2e per tonne of product, with results depending on mix design.

Nov 11, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512