Skip to content
‹ Back to IndustriesEngineering & Construction

Scale with Sergio: Opening a New Manufacturing Facility Isn’t Easy

No matter how much experience or expertise a manufacturing company has, expanding operations is never easy. Even if they’ve done it before. Javier Gallegos, General Manager for Trans-Matic Precision Metal, shared the company’s journey in opening a new facility in Monterrey, Mexico. Powered by RedCircle   Trans-Matic specialized metal stamping capabilities required additional support. They had…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Promoted content from Scale with Sergio on MarketScale.

·
Share
Scale with Sergio: Opening a New Manufacturing Facility Isn’t Easy

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

No matter how much experience or expertise a manufacturing company has, expanding operations is never easy. Even if they’ve done it before. Javier Gallegos, General Manager for Trans-Matic Precision Metal, shared the company’s journey in opening a new facility in Monterrey, Mexico.

Powered by RedCircle

Trans-Matic specialized metal stamping capabilities required additional support. They had previously opened a factory in Suzhou, China, but working in Mexico was different. Gallegos said, “I started the planning and process in 2014, and we opened two years later. Change was necessary and hard.”

Employees were initially concerned about losing their job, but Gallegos said the company approached the change with transparency. “We were open and transparent with employees. We let them know we were keeping everyone on board and presented them the new capabilities and business drivers for why we were opening a new facility,” he shared.

That facility boasts 55,000 square of space and has 23 stamping presses. From the location, employees manufacture, develop tools, prototype, and more.

In the process of launching a new location, Gallegos provided some key insights. He stated, “Be clear with intentions. Plan for what you need throughout the process.”

Since the successful opening of the factor, Gallegos has also established innovative ways to track and monitor production. He added, “We focus on several metrics. Safety and quality dashboards are included as well as metrics on production and how they connect to goals.”

For any company, taking on such a massive project can be daunting. With the right leadership, approach, and strategy, companies can find success no matter how they expand.

Make sure to subscribe to keep up to date with every episode!

Scale with Sergio

Part of this channel

Scale with Sergio

Operational insight and growth strategy from real leaders

Visit the channel

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Requests for Paebbl's carbon-storing cement substitute far outstrip what it can produce

Requests for Paebbl's carbon-storing cement substitute far outstrip what it can produce

Rebond 300 replaces up to 30% of cement in concrete with no equipment changes. In a Holcim and Goldbeck floor slab trial at C30/37, its workability, setting time and finishing matched the reference mix. Demand exceeds what Paebbl can produce, and closing that gap is now its main challenge.

  • 01Once a carbon-storing binder clears a standard ready-mix plant and a C30/37 pour with no schedule change, the question that decides adoption is supply: how many tonnes, at what price, in what share of the mix.
  • 02If Rebond 300 displaces up to 30% of cement yet can cut embodied carbon by up to 40%, the figures imply a negative footprint beyond simple substitution; Paebbl cites a verified -149 kg CO2e per tonne of product, with results depending on mix design.

Nov 11, 2026

ABC's Hensel Phelps Diverge partnership puts field tests ahead of vendor demos

ABC's Hensel Phelps Diverge partnership puts field tests ahead of vendor demos

Carolinas contractors need field-tested evidence on new tools now. ABC's Construction Backlog Indicator reached 8.7 months in September, yet more than a quarter of contractors expect thinner margins.

  • 01A contractor with 8.7 months of work booked has time to pilot new tools. A contractor expecting thinner margins has less room to pay for a tool that only worked in the demo.
  • 02Diverge tests construction tools in controlled pilots and on active jobsites, and ABC can pass along what holds up. Contractors still need to choose what to pilot and define the metric that will decide it.
  • 03In South Carolina, a 1099 specialist brought in to run a tech pilot faces two separate state classification tests. Passing one does not settle the other.

Nov 10, 2026

What a tilt-up credential tells you about a project supervisor

What a tilt-up credential tells you about a project supervisor

The ACI/TCA program separates examination knowledge from verified field experience. That distinction helps teams review qualifications more clearly.

  • 01Technician certification establishes the written-examination requirement.
  • 02Supervisor certification also requires verified construction, tilt-up and supervisory experience.
  • 03Match the exact credential and relevant work history to the responsibility being considered.

Nov 10, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512