Skip to content
‹ Back to IndustriesEngineering & Construction

How Long Do Print Heads Last?

One question print head manufacturers don’t want to answer is how long those print heads last. A better question might be how long should print heads last, or how long can they last? Patrick Coldeway, President of Digitech, knows the answer, and he wasn’t shy about sharing it on Print Precision. No matter the…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Promoted content from DigiTech on MarketScale.

·
Share
How Long Do Print Heads Last?

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

One question print head manufacturers don’t want to answer is how long those print heads last. A better question might be how long should print heads last, or how long can they last?

Patrick Coldeway, President of Digitech, knows the answer, and he wasn’t shy about sharing it on Print Precision.

No matter the manufacturer, the print head is typically the most expensive component of a printer.

“It’s a costly product, and it’s something customers are sensitive to when it comes to how often [they] need to replace them,” Coldeway said.

When speaking about Digitech’s TruFire printer, Coldeway said the print head could last two to eight years. Why such a differential?

“The real answer to that question is it depends. It depends on the environment,” Coldeway said.

The printer can be set up and calibrated to perfection, but if the environment is dusty or the humidity too low, print head issues will follow.

Coldeway said the biggest culprit in the air is dust, and keeping the printer environment at the proper humidity levels is designed to combat that challenge. It is impossible to create a completely dust-free environment in commercial printing, but doing some things to mitigate the amount of dust will prolong the print head’s life.

When a print head fails to meet expectations, there’s typically a reason.

“The biggest failure comes from what you can’t see,” Coldeway said. “These nozzles are really small on these print heads, and they have a reverse pressure that’s holding up the ink. So, when you allow your room environment to get dry, dust particles on the floor get airborne. And now they’re looking for moisture, and it finds the moisture on the actual nozzle. That reverse pressure, over time, can pull small particles of dust into the print head.”

Twitter – @MarketScale
Facebook – facebook.com/marketscale
LinkedIn – linkedin.com/company/marketscale

Part of this channel

DigiTech

News, updates, and expert insights from DigiTech.

Visit the channel

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Case's N Series small dozers keep the same engines and rebuild the cab

Case's N Series small dozers keep the same engines and rebuild the cab

Case Construction Equipment's 650N, 750N and 850N dozers keep the same engine, with updates focused on cab controls, display and customization.

  • 01With the engine unchanged, the M-to-N story is cab controls, operator profiles and improved sightlines.
  • 02With the 650N now on electric-over-hydraulic blade control, Case says its entire dozer lineup uses EH blade control.

Nov 9, 2026

Data centers and advanced factories now compete for the same crews, DPR says

Data centers and advanced factories now compete for the same crews, DPR says

DPR Construction's fourth-quarter 2026 analysis finds AI data centers and advanced manufacturing plants now need the same power, planning, workforce and prefabrication.

  • 01Factory schedules can shift as data centers draw the same electricians, mechanical trades and commissioning specialists.

Nov 8, 2026

HCSS Fleet now pulls engine hours, miles and fuel straight from Motive

HCSS Fleet now pulls engine hours, miles and fuel straight from Motive

HCSS Fleet now pulls engine hours, odometer readings and fuel use straight from Motive, so crews no longer have to key them in by hand. Motive-equipped vehicles and assets also appear on the same map as OEM-connected and HCSS-tracked equipment.

  • 01Engine hours, odometer readings and fuel use from Motive-equipped assets now arrive in HCSS Fleet automatically, delivering hours, miles and preventive maintenance triggers without manual entry.
  • 02How much a contractor gains depends on fleet mix: the more units carrying Motive, the more of the fleet map fills in without anyone typing.
  • 03The question for equipment managers now is which telematics source each asset should report through, because HCSS Fleet takes in OEM, HCSS and Motive data side by side.

Nov 6, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512