Skip to content
‹ Back to IndustriesBuilding Management

Why Ductwork Cleaning Matters After a Major Renovation

After a university dorm renovation in Dallas that included a new air handler but left existing ductwork in place, BMS CAT was brought in to clean the ductwork, VAVs, and registers before students returned. The cleaning removes construction dust and contaminants, supporting indoor air quality and airflow, while before-and-after documentation verifies the work was completed properly.

This story was produced through MarketScale. See how Building Management teams put it to work with Customer Stories & Case Studies.

Promoted content from BMS CAT on MarketScale.

By Colin Trudo · · Hvac CleaningDuctworkBuilding RenovationIndoor Air Quality
Share

Key takeaways

01

Post-renovation duct cleaning improves indoor air quality.

02

Cleaning ducts prevents the spread of dust and contaminants.

03

Efficient HVAC systems require clean ducts to function optimally.

Free workspace

Turn your Building Management expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

A major renovation may transform how a building looks, but preparing a facility for occupants also means addressing the systems operating behind the scenes.

The need for HVAC cleaning after renovation

In this BMS CAT Project Profile, Colin Trudo, Director of HVAC Services at BMS CAT, takes viewers inside a university dormitory project in Dallas, Texas. The facility recently underwent a complete remodel that included the installation of a new air handler. However, the existing ductwork remained in place, creating the need for a comprehensive HVAC system cleaning before students returned.

BMS CAT was brought in to clean the ductwork, VAVs, and registers throughout the dorm. The goal is to remove construction dust and other contaminants that may have accumulated within the system while helping support indoor air quality and airflow.

The project presents several challenges. Tight spaces, small ductwork, and numerous turning vanes require crews to create additional access points to thoroughly clean the system. — Colin Trudo, Director of HVAC Services at BMS CAT

The team is also working against a three-week deadline before students move back into the facility.

Benefits of thorough duct cleaning

For Trudo, success goes beyond completing the cleaning on time. Before-and-after documentation helps verify that the work was completed properly, while crews ensure the facility is left clean and ready for occupancy.

A thorough duct cleaning can also provide benefits beyond removing contaminants. Clearing buildup and obstructions can improve airflow through the system, helping HVAC equipment operate more efficiently.

The end goal is simple: a clean, documented HVAC system and a newly renovated dorm ready to welcome students back to campus.

BMS CAT

Part of this channel

BMS CAT

70 years of disaster recovery expertise, from emergency response to full rebuild.

Visit the channel

Your experts belong here

Every story in MarketScale Building Management starts with a company putting its facilities engineers, energy managers, and service technicians on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners and facilities teams pick on trust, and your engineers turn that trust into inbound conversations.

Book DemoSee how it works15 minutes, straight to a calendar.

About the author

CT
Colin Trudo
B2B Weekly

The week in Building Management, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Building Management: are you visible to AI?

Before they reach out, Building Management buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Building Management expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your facilities engineers, energy managers, and service technicians into the articles, video, and social content Building Management buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Building Management Insights

Yale study models plant wall cutting lab CO2 to outdoor levels with 363 modules

Yale study models plant wall cutting lab CO2 to outdoor levels with 363 modules

Tuning matters most. In Yale's living-wall study, adjusting lighting and airflow direction produced a 43-fold improvement in the system's ability to remove CO2, so facilities and HVAC teams should specify living walls the way they specify air-handling equipment.

  • 01Typical HVAC systems dilute indoor CO2 with outdoor air, so they cannot bring indoor levels below outdoor levels, which typically hover at about 428 ppm in the US, according to NOAA monitoring data. A plant-based system that removes CO2 could get a room below that.
  • 02A plant wall's CO2 performance varied 43-fold depending on lighting and airflow direction, so fan orientation and light intensity belong in the spec, along with the plant count.
  • 03Before buying a plant wall for air quality, ask for measured CO2 removal per module, the direction air moves through the root zone, and the light level the figures assume.

Nov 18, 2026

ASHRAE Guideline 43: a nine-step path to a hospital VMP

ASHRAE Guideline 43: a nine-step path to a hospital VMP

Guideline 43 asks hospitals to document how their HVAC actually runs, and a new Standard 170 addendum signals a shift toward risk-assessed operations.

  • 01Standard 170 sets what an operating room must be able to do; a Ventilation Management Program records who decided what it actually does after hours, and on what evidence.
  • 02The 2027 NFPA 99 recognizes HVAC Ventilation Management Programs in Chapter 9, and a September 2026 Standard 170 addendum requires a risk assessment before operating room ventilation is adjusted.
  • 03For hospitals whose inspectors still enforce older editions, the first useful step is confirming in writing which Standard 170 edition applies, since every later rule in the program depends on it.

Nov 17, 2026

Ken Sinclair's building autonomy roadmap starts with the sensor labels

Ken Sinclair's building autonomy roadmap starts with the sensor labels

Ken Sinclair's five-step roadmap for autonomous buildings keeps existing HVAC hardware and starts by tagging every sensor point in an open ontology. His checklist starts by mapping points into one semantic graph and ends with a one-subsystem pilot where a person approves setpoint changes.

  • 01Sinclair’s step one for autonomy is to map and tag existing automation points for usability. Siemens describes its AI-Assisted Data Onboarding as automating tagging and structuring for existing buildings.
  • 02Commissioning and fault-detection programs can achieve about 20% savings in some cases, according to a sponsored Facility Executive piece on campuses.

Nov 17, 2026

Explore More Building Management Insights

Read more expert perspectives from across Building Management.

Browse Building Management Hub

About the Expert

CT
Colin Trudo

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Building Management and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512