Skip to content
‹ Back to Press ReleasesPress Releases

Atlas Sayaç opens international R&D project call for water metering and industrial IoT

Atlas Sayaç, a Turkish engineering and manufacturing company, opened an international R&D call on November 19, 2026 for water metering and industrial IoT projects. The company proposes linking payments to project success and revenue sharing, inviting water utilities, equipment manufacturers, systems integrators and researchers to collaborate on engineering problems or technologies ready for commercialization.

This story was produced through MarketScale. See how Industrial IoT teams put it to work with AI Visibility (GEO).

By Atlas Sayaç · Atlas SayaçWater MeteringIndustrial IotR&d Partnership
Share

Free workspace

Turn your Industrial IoT expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

KAYSERI, Türkiye, Nov. 19, 2026 — Atlas Sayaç opened a call for international water-technology and industrial Internet of Things R&D projects on Nov. 19, publishing a dedicated application page and a proposal to link payment to project success and the commercial partner’s earnings. The call is directed at organizations outside Türkiye.

The company is inviting water utilities, equipment manufacturers, systems integrators, technology developers and researchers to bring a defined engineering problem or a technology they want to commercialize. Its stated areas of work include water and heat meters, flow measurement, smart irrigation and remote monitoring.

In a statement translated from Turkish, Atlas Chairman Serhat Çavdar said: “I take on R&D projects, and I do not ask for payment until the project succeeds and the other party starts earning money. I accept revenue sharing.”

The proposed arrangement applies to mutually accepted projects. Before work begins, the parties agree in writing on project scope, technical and commercial success criteria, responsibilities, intellectual property, the point at which partner earnings are established and any revenue-sharing terms. Those terms are determined for each project; the announcement does not set a standard revenue percentage or promise a particular commercial result.

Atlas combines electronics, embedded software, mechanical design, manufacturing and software-platform integration. Depending on the application, development can involve M-Bus, LoRaWAN, NB-IoT/GSM or RS-485 communications to connect field measurement equipment with monitoring software.

The proposal gives prospective partners a route to discuss engineering development where the timing of development payments is a barrier to proceeding. Interested organizations are asked to send a short, nonconfidential outline of the problem, intended application, target market and desired commercial outcome. Atlas then discusses feasibility and a potential scope of work with the applicant.

The programme page, published on Nov. 19, provides the primary application point: https://atlassayac.com/en/rd-partnerships/. Çavdar is the primary R&D contact on WhatsApp at +90 532 137 58 06, https://wa.me/905321375806. The company can also be reached at info@atlassayac.com.

About Atlas Sayaç
Atlas Sayaç is an engineering and manufacturing company based in Kayseri, Türkiye. Its work covers water efficiency, water and heat metering, flow measurement, smart irrigation, remote monitoring and industrial IoT. More information: https://atlassayac.com/en/rd-partnerships/.

Your experts belong here

Every story in MarketScale Industrial IoT starts with a company putting its controls engineers, plant-floor specialists, and integration partners on the record. Buyers are already reading this topic. The only question is whose experts they find.

Plant and controls buyers research deep before contact, and your engineers get to shape that research.

Book DemoSee how it works15 minutes, straight to a calendar.

About the author

AS
Atlas Sayaç
B2B Weekly

The week in Industrial IoT, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Free Trial

You just read one Industrial IoT expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your controls engineers, plant-floor specialists, and integration partners into the articles, video, and social content Industrial IoT buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Industrial IoT Insights

Rockwell gives AI agents only the simulation tasks a validated digital twin can support

Rockwell gives AI agents only the simulation tasks a validated digital twin can support

At Automation Fair 2026, Rockwell Automation laid out rules: AI agents may chain digital twin simulation tools only for tasks a validated model supports. Model validation comes first. Green, yellow and red zones set where virtual tests replace physical ones, starting with one or two engineering questions.

  • 01An AI agent's scope in Rockwell's method is set by how well the digital twin has been validated: green-zone tasks can replace physical tests, yellow-zone tasks can trim some, red-zone tasks are off limits.
  • 02People who use simulation results outnumber the engineers who run simulations by about 10 to 1, so agents are aimed at the queue of handoffs between specialists, not at engineering judgment.
  • 03A model can match conveyor dimensions and machine motion and still assume perfect part supply, so any green label should be tied to the specific question it was validated for.

Nov 19, 2026

Why Atlas Copco's cobot on a Mexican transmission line paid back in 10.5 months

Why Atlas Copco's cobot on a Mexican transmission line paid back in 10.5 months

Mexico's industrial robot installations fell 4% in 2024 and 7% in 2025 while global installs rose 11%. A key theme in Valverde’s analysis is that robots tend to pay back where utilization is high—especially in bottleneck stations running across multiple shifts—though support labor and other limits can erode gains. Atlas Copco reports a 10.53-month payback for a cobot on a three-shift transmission station, a supplier-reported result.

  • 01A first-year ROI of 13.92% and a 10.53-month payback describe nearly the same fact: if savings arrive evenly, a station that pays back inside a year returns its cost plus about 14% in its first 12 months.
  • 02In Mexico’s robot market, application and utilization tend to shape payback more than brand or configuration, making high-utilization bottlenecks—especially stations that constrain output across multiple shifts—a logical place to evaluate automation, while factoring in the support labor the cell will still require.
  • 03Mexico's automotive share of robot installs, 63% in 2024, is the number to watch: a falling share with steady totals would mean automation is spreading into electronics, aerospace, food and medical plants.

Nov 19, 2026

Aegis: Simio builds simulations from FactoryLogix MES data

Aegis: Simio builds simulations from FactoryLogix MES data

Aegis Software's Simio unit launched four simulation-based scheduling products on November 18, ranging from ready-to-use Simio Essentials to full Simio APS. For FactoryLogix MES users, the factory model is generated from live production data instead of built by hand. Data quality becomes the real test.

  • 01For plants already on FactoryLogix, simulation-based scheduling can start from existing MES data—so routing, bill-of-material and WIP record quality strongly affects the schedule.
  • 02Working in ranges lets Simio APS put an on-time probability on each order before a date is promised, a different input for customer commitments than a single capacity number.
  • 03The fair test for neural-network routing is the plant's best existing dispatch rule, not random assignment; if the network does not clearly win, the simpler rule stays.

Nov 18, 2026

Explore More Industrial IoT Insights

Read more expert perspectives from across Industrial IoT.

Browse Industrial IoT Hub

About the Expert

AS
Atlas SayaçAtlas Sayaç

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Industrial IoT and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512