Skip to content
‹ Back to IndustriesEngineering & Construction

Water- Your Building’s HVAC Key Component to Comfort

When it comes to building and maintaining better buildings, one might say water is the lifeblood of the entire operation. Ben Feeney, Water Technologies Manager at Boland, dropped in to provide Tyler Kern with a deeper understanding of how water impacts building systems and equipment. Water’s high heat capacity and relatively inexpensive costs make…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

·
Share
Water- Your Building’s HVAC Key Component to Comfort

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

When it comes to building and maintaining better buildings, one might say water is the lifeblood of the entire operation. Ben Feeney, Water Technologies Manager at Boland, dropped in to provide Tyler Kern with a deeper understanding of how water impacts building systems and equipment.

Water’s high heat capacity and relatively inexpensive costs make it a valuable source for distributing and removing heat from a building. One downside is the impurities and minerals water brings that can deposit on and erode equipment over time. “Water treatment chemicals are important to stop corrosion, bacteria, and scaling,” Feeney said. “We can keep the equipment lasting quite a long time if we’re doing those things.”

One strategy for conserving water in a building is recirculation. “In water treatment, what we do is we have a controller that senses the minerals in the water,” Feeney said. “And when you get up to three to five cycles, that water treatment controller will dump some of that water to get some of the impurities out.” Keeping the proper balance of mineral concentration with the right chemicals and precise controls will extend the lifecycle of equipment and systems that come in contact with water.

Another tip to keep water systems from creating more harm than good is the use of water softeners, which remove calcium from the water. “Most minerals dissolve under warm temperatures,” Feeney said. “The problem with calcium is it’s the opposite. As temperatures are warmer, they will drop out of the water. If we can remove that, then we look at chlorides and other elements in the water, but it allows us to push those cycles up higher.”

Planning is everything, and starting a building off with a proper water treatment strategy will mean fewer headaches and costs over time. “Brand new pipe from a manufacturer wants to corrode quickly as soon as the water is put in that piping,” Feeney said. “There’s pipe slag, oils, and greases from manufacturing that pipe, so at startup, as soon as the water is put into that piping system, it is important that a water treater is involved.”

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Bain Capital's reported $250M minority investment values construction platform Kahua above $1B

Bain Capital's reported $250M minority investment values construction platform Kahua above $1B

Bain Capital's Tech Opportunities fund is putting a reported $250 million into Kahua at a valuation above $1 billion. The deal follows what Kahua says is $100 million in annualized revenue. The bet rests on owner-side program data, with AI features the next sign to watch for hospitals, ports and school builders.

  • 01Kahua is selling AI on the strength of the governed data owners already keep in it. That makes data quality and permissions the place to test any new AI feature it ships.

Oct 1, 2026

Element’s Charlotte lab makes tensile specimens from turbine blade roots

Element’s Charlotte lab makes tensile specimens from turbine blade roots

Element Materials Technology’s Charlotte lab wire-EDMs one-eighth-inch cylinders from the root of a turbine blade and low-stress grinds them into tensile specimens—work value stream manager Daniel Steele says he’s not aware other labs do at this size. The lab, which invested $3.2 million in 2019 according to Aerospace Manufacturing and Design, is adding creep and stress rupture frames under a lease signed in January.

  • 01The extraction know-how has a paper trail: Aerospace Manufacturing and Design reported in March 2019 that Element’s $3.2 million Charlotte investment included EDM plunge machines—and that Charlotte was the first Element lab to install them for extracting cylindrical specimen blanks.
  • 02Deloitte's November 2025 outlook put manufacturing construction spending down 7% year over year by July 2025, so a lab adding floor space and creep frames is growing inside one of the few pockets Deloitte flagged for expansion.

Sep 30, 2026

NMHC survey: 37% raised pricing on projects on hold

NMHC survey: 37% raised pricing on projects on hold

NMHC's September construction survey found 37% of respondents repriced shelved projects upward, versus 17% in June. Starts slowed too: 29% of firms started fewer projects, and a growing share saw labor and material costs outrun inflation.

  • 01Upward repricing of projects held three to six months rose from 17% of survey respondents in June to 37% in September, while downward repricing fell from 38% to 14%.

Sep 28, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512