Skip to content
‹ Back to IndustriesEngineering & Construction

The 10 Commandments of Product Developments

There’s a lot more to designing and manufacturing a product than having a great idea and hitting the production lines. While these 10 commandments aren’t exactly set in stone and should be adapted to your unique operational needs and goals, they’re a tremendous starting point on your journey toward lasting success. I. Thou shalt refine…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

·
Share

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

There’s a lot more to designing and manufacturing a product than having a great idea and hitting the production lines.

While these 10 commandments aren’t exactly set in stone and should be adapted to your unique operational needs and goals, they’re a tremendous starting point on your journey toward lasting success.

I. Thou shalt refine thine ideas and vet them.

Inspiration and great ideas can strike anywhere, and it’s important to get the big picture nailed down. However, you should also present your idea to family, friends and trusted potential customers and think critically about who the product is for and why they’d want it.

II. Thou shalt research the marketplace.

Do the legwork on potential customers, competitors, and more, and seek out a professional in Intellectual Property to protect your idea.

III. Thou shalt raise money, and, whence thou hast raised money, thou shalt again raise money.

Craft an elevator pitch, get an initial round of funding, and then do it again. Seek the advice of others who have been successful in raising money in the venture capital community and follow their lead.

IV. Thou shalt create requirements to convey thine ideas to product designers.

Thorough guidelines need to be established that outline what the product should and shouldn’t do, how it will be used, what it will look like, and more. Think in terms of accuracy, feasibility, whether a requirement is necessary, and more.

V. Thou shalt use an experienced, professional design team.

Avoid using a contract manufacturer’s design resources. You need a team of professionals with experience in many disciplines dedicated wholly to your success.

VI. Thou shalt verify thy design with prototypes.

Products always need to be tested in the real world with real end-users. What’s great on paper doesn’t always translate to reality.

VII. Thou shalt not produce many before thou hast made a few.

Always leverage preproduction with initial batches that can test the process and finished result before ramping up production.

VIII. Thou shalt have no regulatory requirements unverified.

Compliance with national and international regulations may be required to sell your product or recommended to reduce your liabilities. Have a plan for getting your product certified.

IX. Thou shalt honor thy sales and marketing team.

These are very different roles, but each is critical. Marketers drive awareness, and salespeople close the deal. Select people with skillsets in each.

X. Thou shalt choose thy partners carefully.

You don’t need to be skilled in everything – that’s where valuable partners come in. Carefully vet potential partners and select those who truly fill in those gaps with expert knowledge and proven results.

—

To lean more about how Paragon can transform your product idea, marketing requirement, or product specification into a marketable product that’s profitable, contact them today.

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Jemal and DivcoWest plan 323 apartments inside a 1982 DC office building

Jemal and DivcoWest plan 323 apartments inside a 1982 DC office building

Jemal Real Estate Strategies and DivcoWest plan to convert 1255 23rd Street NW, a 342,000-square-foot Washington, D.C. office building, into about 323 apartments. Madison Realty Capital lent $40 million for acquisition and predevelopment. DivcoWest is the current owner of the property and will retain an equity interest.

  • 01About 323 apartments at 1255 23rd Street NW would come close to the nearly 350 units Jemal Real Estate Strategies has created across its Syracuse and Richmond conversions combined, in a single building.
  • 02DivcoWest is selling into the venture but keeping an equity stake alongside Jemal.

Oct 12, 2026

Why a clean-looking aerospace part can still fail a residue test

Why a clean-looking aerospace part can still fail a residue test

Element Materials Technology explains NVR and gravimetric cleanliness testing for aerospace, defense and medical parts in a webinar featuring its Hartford and Los Angeles labs. Joe Moore and Katie Legowski show how a blank analysis, a solvent rinse and a weighed filter patch turn invisible residue into a number against IEST-STD-CC1246 levels, and how AMS 2700 F changed the passivation acid default in 2018.

  • 01Nonvolatile residue testing weighs what a solvent rinse removes from a part, so a film the eye cannot see becomes a pass or fail figure against the drawing.
  • 02IEST-STD-CC1246E, the document that replaced MIL-STD-1246 in 2002, sets residue limits from 10 nanograms to 25 milligrams per 0.1 square meter, and its particle levels count down to 5 microns, far below the 100 micron width of a hair.

Oct 12, 2026

Bain Capital's reported $250M minority investment values construction platform Kahua above $1B

Bain Capital's reported $250M minority investment values construction platform Kahua above $1B

Bain Capital's Tech Opportunities fund is putting a reported $250 million into Kahua at a valuation above $1 billion. The deal follows what Kahua says is $100 million in annualized revenue. The bet rests on owner-side program data, with AI features the next sign to watch for hospitals, ports and school builders.

  • 01Kahua is selling AI on the strength of the governed data owners already keep in it. That makes data quality and permissions the place to test any new AI feature it ships.

Oct 1, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512