Skip to content
‹ Back to IndustriesEngineering & Construction

The Imperatives for a Factory of the Future: Digital. Flexible. Green.

In this episode of To the Edge and Beyond, Christine Boles and Muthuraman “Ram” Ramasamy discuss three imperatives for the Factory of the Future. Those imperatives are that the factory must be digital, flexible, and green. Industry 4.0 holds promise, but there is much work ahead to realize the benefits created by technological innovation. The…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Promoted content from Intel on MarketScale.

·
Share

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

In this episode of To the Edge and Beyond, Christine Boles and Muthuraman “Ram” Ramasamy discuss three imperatives for the Factory of the Future. Those imperatives are that the factory must be digital, flexible, and green. Industry 4.0 holds promise, but there is much work ahead to realize the benefits created by technological innovation.

The “Race to Zero,” or to become carbon neutral, is a focus for the future factory. Still, many factories have a long way to go to achieve their sustainability goals. Much of manufacturing relies on older machinery with antiquated operations, so making the leap to more sustainable equipment is a journey.

Boles believes that manufacturers of all sizes face myriad challenges that call for increasing flexibility. There are staffing shortages, supply chain issues, and rapidly changing demands.

“Despite those industry-wide challenges, and regardless of the company’s size, there’s a shared end goal [that they] all have,” Boles says. “Whether it’s the improvement of safety, the increased quality or quantity of output, [or reduction in its] carbon footprint, a successful transformation approach [will] vary by organization and size.”

The path upon which each manufacturing company embarks towards the future factory will differ, but Boles contends that companies must take trusted partners – with a deep knowledge of industry-wide challenges and the organization’s unique issues – along on the journey. She says it’s not about these trusted partners “necessarily giving [manufacturers] the plan, but helping each organization create [its] own strategy and roadmap for solution deployments.”

Boles believes that, when organizations free themselves from proprietary and closed systems, they can realize the benefits of technological innovations. Multi-vendor, interoperable solutions with commercially available hardware and software components create flexibility and value for the Factory of the Future.

Learn more about the Factory of the Future by connecting with Christine Boles and Ram Ramasamy on LinkedIn or visit:

 Subscribe to this channel on Apple Podcasts, Spotify, and Google Podcasts to hear more from the Intel Internet of Things Group.

Intel

Part of this channel

Intel

Silicon and AI platforms powering enterprise and edge compute.

Visit the channel

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Bell partnership lets Hitachi target the classes that make up roughly 90% of the North American ADT market

Bell partnership lets Hitachi target the classes that make up roughly 90% of the North American ADT market

Through a collaboration with Bell Equipment, Hitachi Construction Machinery Americas plans to add three articulated dump trucks: the ZD30, ZD45 and ZD50. The launch is scheduled for early summer 2027, and Hitachi dealers in the United States and Canada will support the trucks. Ranging from 30 to 50 tons, the models put Hitachi in the equipment classes that make up roughly 90% of the North American ADT market. The lineup gives contractors a single dealer network for excavators, wheel loaders and articulated dump trucks.

  • 01Hitachi's ZD30, ZD45, ZD50 articulated trucks launch early summer 2027 and address size classes representing about 90% of North American ADT demand
  • 02Bell Equipment, with over 26 years in the North American ADT market, manufactures the trucks while Hitachi dealers distribute and support them across the U.S. and Canada
  • 03The partnership lets Hitachi dealers quote excavators, wheel loaders, and ADTs from one network, expanding their offering.

Oct 30, 2026

Hover 3D roof measurements now flow straight into Trussi roofing estimates

Hover 3D roof measurements now flow straight into Trussi roofing estimates

Trussi, built inside Shamrock Roofing and Construction, imports Hover 3D measurements into job records and estimate fields. Hover reports bill to the contractor’s own Hover account at existing pricing, with no markup. One phone capture can also support exterior quotes in multi-trade workflows.

  • 01Hover reports bill to the contractor's own Hover account at existing prices, with no reseller markup.
  • 02One smartphone capture can feed both a roof estimate and a siding, window, door and trim takeoff, which matters most for contractors who sell more than one exterior trade.

Oct 27, 2026

Procore expands NVIDIA collaboration on construction digital twins

Procore expands NVIDIA collaboration on construction digital twins

Procore has announced closed-beta digital twin capabilities, powered by NVIDIA Omniverse libraries, that link 3D models to procurement and schedule data and to DroneDeploy site captures. How much they pay off likely depends on how current each contractor's schedule and procurement records are, especially on data center megaprojects.

  • 01Procore’s NVIDIA twin links model to schedule and procurement data, showing how a late delivery can ripple into downstream work.
  • 02A delay simulation is only as good as the delivery dates behind it: projects that track procurement outside Procore would get the 3D model with less of the ripple analysis.
  • 03Investing.com says Commissioning and an IBM Maximo integration are in beta; they could extend the twin past handover as closed beta expands.

Oct 25, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512