Skip to content
MarketScale
‹ Back to IndustriesEngineering & Construction

As Goldman Sachs Predicts Deflation, Labor Market Remains “Most Forward-Looking” Inflation Indicator

Deflation is finally in the air. Firms like Goldman Sachs are expecting a drastic decline in U.S. inflation in 2023, estimating personal consumption expenditure (PCE) figures as low as 2.9% by December 2023, compared to the current measure of 5.1%. This comes in the wake of the CPI growing at slower rate than anticipated, clocking…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Share

Get featured

Want to get featured in MarketScale Engineering & Construction?

Create a free MarketScale workspace and get your company's expertise featured across our Engineering & Construction coverage. No credit card, no demo required.

Start free

Deflation is finally in the air. Firms like Goldman Sachs are expecting a drastic decline in U.S. inflation in 2023, estimating personal consumption expenditure (PCE) figures as low as 2.9% by December 2023, compared to the current measure of 5.1%. This comes in the wake of the CPI growing at slower rate than anticipated, clocking in a 0.4% increase M/M compared to an estimated 0.7% consensus.

According to Goldman Sachs, much of this deflation prediction is due to factors such as slower wage growth and supply chain constraints easing, overall putting less pressure on cost of production and logistics. This is baring out in core inflation numbers; inflation excluding food & energy costs, the core index, rose by only 0.3% in October, compared to a 0.6% rise the previous two months.

How accurate or confident are these deflation estimations from the likes of Goldman Sachs, though? Some economists, like Toptal Chief Economist Erik Stettler, say it’s important to keep in mind that inflation is “not linear,” meaning early deflation wins will be easier to come by than reproducing them the closer inflation gets to 0%. And while one month of easing pressures is optimistic, businesses should keep an eye to various factors to gauge how likely deflation actually is over the next year. According to Stettler, the primary gauge has been and should continue to be the state of the labor market.

Erik’s Thoughts

“The labor market remains the largest and most forward looking indicator for what we can expect from inflation, the Fed and the economy next year. And in this respect, there are certain additional indications of easing pressure. Labor costs rose three and a half percent last quarter after two consecutive quarters of well over 8%.

And very importantly, labor productivity increased, albeit by less than 1% after two consecutive quarters of some of the largest decreases we’ve seen since we began measuring it in 1947. Taken together, these two indications of ease and cost pressure and increased real output, do suggest that the latest slow down in inflation can be expected to continue.

Regarding Goldman’s specific forecast, however, it’s important to bear in mind that inflation is neither linear nor even a strictly mechanical phenomenon. By that, I mean, it is one thing to bring it down from a boil, but the closer we get to that 3% or less target, the more difficult each marginal element will be, even when we’re talking about the same absolute size and change.

Likewise, the role of expectations cannot be understated, and we still don’t know exactly how much the last few months have truly changed the market’s expectations on inflation, which then lead to its ongoing momentum and also set the floor. In terms of how low it can reasonably be brought in that one year timeframe. It is therefore very possible that it could hit a floor closer to around 4%, and then the Fed really will have to decide how much harder it’s willing to push.

Goldman, of course, understands this, but truly incorporating those dynamics into any forecast model are very difficult.”

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Get your team featuredSee how it works15 minutes, straight to a calendar.

Follow Engineering & Construction Insights

Get new expert content in your inbox.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free plan

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Create a free workspace and see it with your own people. No credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What you get, free

Your own MarketScale workspace, up to 10 people
One professional video edit a month for qualifying companies
Media requests to your crowd, remote recording, AI writing tools
$0, no credit card, nothing that expires

More Engineering & Construction Insights

Senate bill would double smart water grants to $50 million a year

Senate bill would double smart water grants to $50 million a year

S. 2388, the Water Infrastructure Modernization Act of 2025, would double an EPA water tech pilot to $50 million a year through 2028. Grants would cover design, construction, training and operations for leak detection, advanced metering and AI analytics, WaterWorld reported. Planning and maintenance stay on the utility's tab.

  • 01Under S. 2388 as WaterWorld describes it, feasibility studies are not grant-eligible, so a utility would have to pay to build the case for a smart water project before applying for help building the project itself.
  • 02The bill's eligible list puts advanced digital design and construction management tools in the same bucket as meters and sensors, which would give a utility's capital delivery team a claim on the same grant as its field operations group.
  • 03The existing pilot program's authorization runs through 2026, per WaterWorld; the bill would extend it to 2028, and its last reported status was 'introduced' as of Aug. 12, 2025.

Sep 17, 2026

MEP systems can run 30-40% of a construction budget, ASCE course says

MEP systems can run 30-40% of a construction budget, ASCE course says

ASCE is running its two-day live webcast, Introduction to MEP Construction Management, on November 9-10, 2026, taught by Anthony E. Sparkling. ASCE says mechanical, electrical and plumbing systems can reach 30-40% of many construction budgets. The course targets owner's representatives, project managers and architects who manage those subcontractors. It carries 14 PDHs.

  • 01ASCE's 30-40% figure for MEP's share of many construction budgets is the reason owners should care: a large share of the check is signed on the strength of others' judgment.
  • 02The sharper question for a capital projects team: can the owner's representative read the mechanical and electrical sheets and follow a subcontractor's basic estimating units before bids come in?
  • 03The live webcast runs Nov. 9-10, 2026, with the next session not until Sept. 27-28, 2027; an on-demand version is available in between, and ASCE quotes group rates for five or more registrants.

Sep 17, 2026

CAS Automotive launches Damaged Equipment to sell fleets' damaged and end-of-life machines

CAS Automotive launches Damaged Equipment to sell fleets' damaged and end-of-life machines

CAS Automotive has officially launched Damaged Equipment, an on-demand remarketing service that gives fleets, dealers, rental companies and insurers a guaranteed offer on damaged, surplus and end-of-life machines. The service ran as a proof of concept from late 2025. It adds a fixed-offer channel next to auctions and trade-ins, though CAS has not published pilot volumes or pricing.

  • 01A guaranteed offer on a wrecked or worn-out machine is a new reference point fleets can hold against an auction estimate, a dealer trade-in or a parts-out before deciding where a unit goes.
  • 02Damaged Equipment now serves insurers and third-party administrators alongside fleets, dealers and rental companies, which puts one disposition channel in front of every party to a total-loss equipment claim.
  • 03The launch establishes the model and the buyer network but not the results: CAS Automotive has disclosed no volumes, recovery rates or turnaround times from its 2025 pilot, so the first test is a side-by-side quote on a real unit.

Sep 17, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a 15-minute demo

Or call us. No forms required. We pick up. 214-945-2512