Skip to content
‹ Back to IndustriesBuilding Management

Styrvel licenses NeoMesh to cut retrofit wiring for radiator controls

Buyers should test battery life.

This story was produced through MarketScale. See how Building Management teams put it to work with Customer Stories & Case Studies.

By MarketScale Newsroom · StyrvelNeocortecNeomeshLumenradio W-bacnet Compact
Share

Key takeaways

01

In occupied buildings, retrofit costs are often driven by cabling or dedicated repeaters. NeoMesh’s pitch is a self-organizing mesh where battery devices relay traffic, aiming to avoid that extra infrastructure.

02

Which wireless retrofit fits depends on what is already in the walls.

03

No field results have been published for this kind of platform yet. Battery-life data from buildings already in service, and a clear answer on who replaces the cells, should be part of any pilot.

Free workspace

Turn your Building Management expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

Picture radiator thermostats and room sensors running on batteries and reporting to a single gateway, with no new cable pulled through the walls and no repeaters fixed to the ceiling. NeoCortec announced that Styrvel, a Danish developer of a wireless retrofit building automation platform for existing commercial buildings, has signed a software licensing agreement for NeoMesh, NeoCortec's ultra-low-power wireless mesh protocol stack. According to SmartBuildingMag, the agreement was announced at electronica 2026, which ran November 10 to 13 at Messe München.

In Styrvel's platform, NeoMesh is the communication layer between the battery-powered devices and the building gateway. That comes from NeoCortec's announcement, which EE Journal published on November 13 and The Volt Post covered a day earlier. The bet behind the deal is the more useful part. In heating and indoor-climate control for buildings that already exist, much of the cost and disruption sits in the network, so Styrvel chose to solve the network first.

How a mesh removes the repeater line item

SmartBuildingMag's write-up notes that bringing automation into commercial buildings already in use typically requires new communication infrastructure. That can mean cabling or, for many wireless systems, dedicated repeaters, and either option raises installation effort and cost. That is why installation cost, scalability and battery life head the list when a retrofit team chooses a wireless technology.

NeoMesh's answer is a self-organizing mesh. Each device relays messages for its neighbors, so coverage grows as thermostats and sensors go in, and no separate layer of infrastructure is needed. NeoCortec says the stack can support large numbers of battery-powered nodes this way. The company also says it built NeoMesh from scratch to get past the limits of Zigbee, Z-Wave, Bluetooth and Thread on device count, range and power draw. Those comparisons are NeoCortec's own, and the announcement includes no benchmark data to check them.

According to SmartBuildingMag, a mesh topology passes messages from node to node, so coverage expands as more devices are installed instead of depending on separate infrastructure. That suggests where the devices go, and how many there are, could shape the coverage.

NeoCortec has been working on this problem for a while. It was founded in 2007 to develop and patent innovations in wireless sensor networks, and NeoMesh is its main product: a protocol embedded in smart devices so they can talk to each other and to the cloud. The company describes its goal as making non-smart and large buildings smarter, with "easy upgrade without cabling." The stack is also bi-directional, so traffic runs both ways across the mesh. That's the difference between control and monitoring: the gateway has to reach the thermostat, not just hear from it.

NeoCortec sells NeoMesh two ways: built into its own ultra-low-power, bi-directional mesh communication modules, or licensed to run on a range of chipsets. Styrvel took the software licence, which suggests it plans to run the stack on hardware of its own choosing rather than designing around NeoCortec's modules.

For Styrvel, the payoff is commercial as much as technical. Founder and CEO Cato Skibsted Fagermo said NeoMesh's main value is that it lets the company build large-scale automation without adding communication infrastructure throughout a building. He tied that to a goal of making retrofit control simple and cheap enough for a much larger share of existing buildings. NeoCortec CEO Thomas Steen Halkier called mesh the most cost-effective way to build intelligent heating and climate infrastructure, especially in buildings that are already standing.

In an occupied building, every cable run and every repeater means labor, disruption and cost, which is why the wireless layer can decide whether a retrofit pays off at all. According to SmartBuildingMag, running sensors and thermostats on batteries lets installers put them in spots with no power supply, while a self-organising network makes commissioning and later expansion simpler.

You see the same pattern outside building controls. Writing in EC&M in October, Legrand's Aaron Vigliotti noted that in most commercial EV charging developments the charger is only a fraction of the total investment. Civil site work such as excavation, underground conduit and repaving makes up most of the labor and cost. It's a different trade with the same lesson. The infrastructure around a device can cost more than the device, and that infrastructure is exactly what Styrvel is trying to design out.

LumenRadio takes a different wireless path

The Styrvel deal comes a few weeks after ACHR News reported the 2027 AHR Expo Innovation Award winners. ACHR News lists LumenRadio's W-BACnet Compact as the winner in the Building Automation category and describes it as the industry's smallest wireless BACnet MS/TP cable replacement, enabling retrofits without running RS485 wiring. It features snap-on installation, Bluetooth commissioning, auto-baud detection and LumenRadio's interference-resistant wireless mesh. Entries are evaluated by a panel of third-party judges who are ASHRAE members and assessed on innovative design, creativity, real-world application and potential market impact.

The field gives the win some weight. The publication's October 27 report says the awards draw hundreds of submissions each year across 10 categories. In Building Automation, the finalists alongside LumenRadio were Delta Intelligent Building Technologies with Building Canvas and Schneider Electric with EcoStruxure Foresight Operation. ACHR's description says the W-BACnet Compact "dramatically reduces installation time, cost, and disruption," which are the same burdens SmartBuildingMag lists for retrofits generally. With real-world application one of the four judging criteria, a product sold on cutting installation burden fits that test squarely.

Both products avoid the same cable, but they start from different buildings:

  • LumenRadio W-BACnet Compact: a wireless BACnet MS/TP cable replacement that enables retrofits without running RS485 wiring, while preserving full BACnet interoperability.
  • Styrvel on NeoMesh: adds battery-powered room sensors and electronic radiator thermostats that report to a gateway over a self-organizing mesh, aimed at heating and indoor-climate control in existing commercial buildings.

Commissioning is where the two pitches meet. LumenRadio relies on Bluetooth commissioning and auto-baud detection to speed setup. SmartBuildingMag credits NeoMesh's self-organising network with making commissioning simpler. Either way, the hours a technician spends getting devices talking count as part of the wiring problem, not an afterthought.

Two products don't make a market. Still, an award-winning cable replacement and a licensing deal built on avoiding cable suggest that retrofit vendors see wiring as the main obstacle to automating existing buildings. AHR Expo show manager Jeff Stevens framed this year's winners as serving energy efficiency, compliance, cost-effectiveness and better equipment performance, and cost-effectiveness is the goal both of these products lean on hardest. For facilities teams running BACnet MS/TP, a cable replacement like LumenRadio's could be the simpler fit. For operators of radiator-heated buildings that want room-level control, a battery-powered platform like Styrvel's could be the closer match.

Where the battery bill shows up

The strongest objection to the wireless pitch is that it moves cost somewhere else instead of removing it. A cabled sensor never needs a battery. A battery-powered thermostat eventually needs someone to visit it, and a building with hundreds of them could turn cell replacement into a regular maintenance task. The announcement itself names battery lifetime as one of the three requirements that matter most in a retrofit, so buyers have good reason to ask about it.

NeoCortec's design answer is in how it describes the stack: ultra-low-power, and built to beat other protocols on power consumption. Those are the right claims to test. In a mesh, every battery-powered node relays its neighbors' messages as well as sending its own, so a device's position in the network could affect how fast it drains its cells.

Hard evidence is thin so far. SmartBuildingMag notes plainly that no quantified results have been published, and that the expected benefits follow from the architecture rather than from measured field data. That's normal for a licensing deal announced at a components trade show. It also means a building owner considering a pilot should write the measurements into the pilot plan, rather than hoping the vendor reports them.

Before signing a wireless retrofit pilot, ask for battery-life data from buildings already in service, not lab estimates, and agree in writing who replaces the cells and when.

Chicago in January, field data after

The next fixed date belongs to the award side of this story. ACHR News reports that the 2027 winners will be celebrated at AHR Expo, which ASHRAE and AHRI co-sponsor, from January 25 to 27, 2027, in Chicago, running alongside ASHRAE's Winter Conference. One overall 2027 Product of the Year, selected from the 10 category winners, will be announced at a special reception in Chicago. The honor is awarded for exceptional leadership in HVACR innovation, and LumenRadio, exhibiting at booth S6049, is in that pool.

A wireless cable replacement taking the top prize would show how seriously the HVACR establishment rates the retrofit wiring problem. Even so, an award reflects judges' assessment of design and likely impact. It isn't the same as performance data from buildings in operation.

For Styrvel and NeoCortec, the signal to watch is the first set of published results from occupied buildings: battery life, how many devices a single gateway handles, and how installation time compares with a cabled job. Those figures would show whether a no-cable, no-repeater mesh delivers on Fagermo's aim of making automation worth installing in many more existing buildings.

Featured companies

Your experts belong here

Every story in MarketScale Building Management starts with a company putting its facilities engineers, energy managers, and service technicians on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners and facilities teams pick on trust, and your engineers turn that trust into inbound conversations.

Book DemoSee how it works15 minutes, straight to a calendar.

About the author

MarketScale Newsroom
MarketScale NewsroomEditorial Team, MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

B2B Weekly

The week in Building Management, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Building Management: are you visible to AI?

Before they reach out, Building Management buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Building Management expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your facilities engineers, energy managers, and service technicians into the articles, video, and social content Building Management buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Building Management Insights

How a simple spill separates autonomous buildings from automated ones

How a simple spill separates autonomous buildings from automated ones

AutomatedBuildings.com's November Monday Live session defined building autonomy with a spill: automation sends an alert, while autonomy opens the work order and confirms the fix. That test helps facility teams judge platforms such as Honeywell Forge Cognition and PassiveLogic Level 3. The hard gaps sit in building data, leases and contractor handoffs.

  • 01A building counts as autonomous when it closes the whole loop on a problem: locate it, decide the response, open the work order, notify the right people and confirm resolution. An alert by itself is automation.
  • 02The earliest working examples of building autonomy started with something most facilities already own: the event calendar, used at the Perot Museum in Dallas and the Vancouver Convention Centre to pre-cool rooms before crowds arrived.
  • 03Read vendor pilot claims closely: the Voyager “alarm figure” is presented as a result, while Honeywell’s energy figure is framed as identified potential—keep that distinction when evaluating performance terms.

Nov 21, 2026

Deloitte survey: 26% involve tax specialists when deals take shape

Deloitte survey: 26% involve tax specialists when deals take shape

More than 90% plan to spend more on data and technology, while fewer than half have advanced AI controls in place—suggesting budgets may be rising faster than governance.

  • 01More than 60% of commercial real estate executives plan to chase stronger tax incentives, yet only 26% involve a tax specialist when a deal first takes shape. When tax first sees a deal is a process metric worth tracking.
  • 02At a 6.5% cap rate, each added dollar of annual income supports about $15.40 of value versus $20 at 5%, which raises the rent premium an upgrade has to earn.

Nov 21, 2026

A Damaged Roof Drain Cap Let Rain Pour Into a Nashville Hospitality Property

A Damaged Roof Drain Cap Let Rain Pour Into a Nashville Hospitality Property

A damaged cap on a rooftop drain let rain pour into a Nashville hospitality property, according to BMS CAT Commercial Account Manager Sabrina Box. Her crew is removing wet materials and drying the building ahead of the rebuild. Box says much of this damage can be prevented with a walk of the property before a freeze or storm to find risk areas and fix them first.

  • 01A single damaged roof drain cap let rain pour into a Nashville hospitality property during a storm.
  • 02BMS CAT's recovery sequence: remove damaged materials, place dehumidifiers, dry the structure, then rebuild.
  • 03A pre-storm walk to find risk areas, roof drains included, can stop this kind of loss before it starts.

Nov 20, 2026

Explore More Building Management Insights

Read more expert perspectives from across Building Management.

Browse Building Management Hub

About the Expert

MarketScale Newsroom
MarketScale Newsroom

Editorial Team

MarketScale

The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Building Management and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512