Skip to content
MarketScale
‹ Back to IndustriesEngineering & Construction

Rob on the Job: Temp/RH for 6-story Construction Project

Polygon’s Rob Sullivan, aka Rob on the Job, provides a “day in the life” tour of a construction site in Allison, Maryland. As a part of his workday, Rob focuses on maintaining temperature and humidity control while installing finished material in a six-story building. Control achieved using four H.C.U.s (Hybrid Desiccate and Refrigerate Units)…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Promoted content from Polygon on MarketScale.

Share

Get featured

Want to get featured in MarketScale Engineering & Construction?

Create a free MarketScale workspace and get your company's expertise featured across our Engineering & Construction coverage. No credit card, no demo required.

Request an invite

Polygon’s Rob Sullivan, aka Rob on the Job, provides a “day in the life” tour of a construction site in Allison, Maryland. As a part of his workday, Rob focuses on maintaining temperature and humidity control while installing finished material in a six-story building. Control achieved using four H.C.U.s (Hybrid Desiccate and Refrigerate Units) is particularly effective given the day’s high relative humidity of about 90% and temperature of around 67 degrees. Rob checks the gear, provides a glimpse into installing ACU 6000 CFED units, and discusses on-site safety measures. He concludes his video by thanking viewers for joining him and promising future on-the-job adventures.

Video TranscriptExpand ↓

Hey guys, Rob on the job. Thanks for joining me. We're gonna do a day in the life and see what you think. Hey, guys. So Rob here on the job. We're at a construction site in Allison, Maryland. And set up to the climate controlled. I just want to give you a give you a visual of what's going on. This is an active site. A lot of safety regulations and rules to get on-site and just figured I'd show you figure out a little bit. So we've been tasked with providing a little bit of temperature relative humidity control in the space during construction, during install of finished material. So it's a six story building. And we install at this point four H. C. U. S. Hybrid desiccate and refrigerate units outside today. Our conditions are about ninety percent relative humidity. Sixty seven degrees, e sixty five to sixty seven, and we're going to run through a little bit of performance check on the gear. Bridal install and look here for ACU six thousand CFED units while they get to single door see that they're currently working on it, closing the face, activate what they want to go with the safe drag app. Okay. So that concludes the Rob on the job adventure. So thanks joining me, and we'll see you next time.

Polygon

Part of this channel

Polygon

Interior climate control and remediation for commercial property teams.

Visit the channel

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Get your team featuredSee how it works15 minutes, straight to a calendar.

Follow Engineering & Construction Insights

Get new expert content in your inbox.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. See how AI describes your company today, and where competitors show up instead.

Free workspace

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Create a free workspace and see it with your own people. No credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What you get, free

Your own MarketScale Studio workspace
One video edit a month, on us
AI writing, editing, and publishing tools
In-platform coaching to learn the system

More Engineering & Construction Insights

Valtra N135

Valtra N135

This is a request for video editing assistance rather than a published article with factual content. No substantive information about Valtra tractors or products is present in the body text to analyze.

  • 01No verifiable claims or data points are present in the source text

Sep 7, 2026

FAB 40 highlights top U.S. metal fabricators, including acquisitive Cadrex

The Fabricator’s 2023 FAB 40 ranks U.S. metal fabricators by reported revenue. PR Newswire reported Cadrex Manufacturing Solutions debuted at No. 2 with $480 million in 2022 revenue after a series of acquisitions, while MEC again held No. 1 with $539.4 million.

  • 01PR Newswire reported Cadrex Manufacturing Solutions entered The Fabricator’s 2023 FAB 40 at No. 2 after a series of acquisitions.
  • 02MEC has held No. 1 on the FAB 40 since 2011 and kept the spot in 2023 with $539.4 million in reported 2022 revenue, according to PR Newswire, a benchmark for scale at the top of the list.
  • 03PR Newswire flagged both material price inflation and demand as drivers of record revenues, buyers should press suppliers on what portion of growth was pricing versus volume.

Sep 6, 2026

HUD backs a 24-month study on mass-timber modules that ship and stack faster

HUD backs a 24-month study on mass-timber modules that ship and stack faster

HUD funded a 24-month Washington State University project on hybrid mass-timber modular housing. It targets transportability and faster site assembly. A 2023 Journal of Building Engineering review says 2D modular CLT tends to ship farther and build faster than 3D.

  • 01If transportation is the cost driver, HUD’s study plan points straight at the spec: treat the truck interface, tie-downs, and lifting points as part of the structural module design, not afterthought hardware.
  • 02The most actionable design fork in the CLT modular literature is 2D versus 3D: according to a 2023 Journal of Building Engineering review, 2D modules are typically moved longer distances and assembled faster on average.
  • 03Owners who want future change-of-use optionality can start writing it into module grids and connection details now. HUD-backed research is explicitly testing modules that can be repurposed across occupancies over their lifetime.

Sep 6, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a 15-minute demo

Or call us. No forms required. We pick up. 214-945-2512