Skip to content
‹ Back to IndustriesEngineering & Construction

DOAS Powers Efficiency, Savings and Healthier Air: Find Out Why and How

Commercial buildings requiring 100% outdoor air to meet ventilation standards and maintain indoor air quality (IAQ) is nothing new in the engineering world. However, the COVID-19 pandemic has brought calls for increased ventilation to further enhance IAQ and improve occupant health, which has brought challenges for traditional HVAC systems. The main responsibility of a 100%…

This story was produced through MarketScale. See how Engineering & Construction teams put it to work with Partner & Channel Enablement.

Promoted content from RenewAire on MarketScale.

·
Share
DOAS Powers Efficiency, Savings and Healthier Air: Find Out Why and How

Free workspace

Turn your Engineering & Construction expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

Commercial buildings requiring 100% outdoor air to meet ventilation standards and maintain indoor air quality (IAQ) is nothing new in the engineering world. However, the COVID-19 pandemic has brought calls for increased ventilation to further enhance IAQ and improve occupant health, which has brought challenges for traditional HVAC systems.

The main responsibility of a 100% outdoor air unit is to precondition the incoming air. In this process, the system inherently handles large heating and cooling loads. Traditional systems struggle to introduce outdoor air into an environment where it’s both dehumidified and cooled. This is why many in the field are turning to Dedicated Outdoor Air Systems (DOAS) with energy recovery.

So, how does DOAS solve the gaps of conventional HVAC, powering efficiency, savings and healthier air?

High-Efficiency DOAS and How it Works

A DOAS works much differently than HVAC systems. Here’s how.

Decoupling

A DOAS unit uses separate equipment to condition the outdoor air brought indoors for ventilation, and then delivers the air to each occupied space. This is done either directly or in conjunction with terminal or central HVAC units serving those same areas, which maintain space temperature. Outdoor air goes through filtering and tempering with efficient energy recovery and distributes it throughout a space in ductwork independent of heating and cooling. The advantage of this is optimal control with each function in siloes.

Energy Recovery

Adding energy recovery significantly minimizes the heating and cooling loads and can thus reduce the size of HVAC equipment required to condition the air. A DOAS unit uses a staticplate, cross-flow core to separate the outgoing, polluted indoor airstream from the incoming fresh airstream—while simultaneously transferring total energy (heat and water vapor) between the two airstreams. This means that the airstreams do not mix and pollutants are not transferred across partition plates. In the winter, that means that the cold, dry outside air is preheated and humidified by the outgoing warm interior air, and in the summer, the warm, humid outside air is precooled and dehumidified by the outgoing air-conditioned interior air.

A DOAS that includes energy recovery will condition outdoor air in the most sustainable way. Since HVAC units operate independently, you can downsize equipment and realize more savings.

Size Optimization

The optimization of the system design includes proper sizing, minimal fan power, and fewer pressure drops. When a system isn’t sized correctly and is unnecessarily large, wasted energy is more likely to occur. With a DOAS setup, you’ll experience a smaller footprint for heating and cooling. This reduces the amount of short cycling. It also provides a system that performs more efficiently and thus reduces energy costs.

As a result, your building can exceed minimum requirements and respond to the new demands of air quality prompted by COVID-19.

Without a DOAS with energy recovery, ventilation and dehumidification aren’t efficient. Many parts of the world have hot and humid air during warmer seasons. Bringing that air indoors requires substantial treatment to dehumidify the incoming air comfortable for occupants. A typical HVAC system strains to do this, and even when it is successful it can make mold growth higher. This conventional equipment doesn’t have the proper design to do the best job. Plus, it’s an energy drain.

Conversely, DOAS with energy recovery capabilities can handle such environments. Its unique design of separating ventilation from heating and cooling makes it much more manageable. You can apply it to many spaces, including high occupancy (multi-family, institutions, etc.) or any internal area that’s unhealthy or germ-ridden, like hospitals.

DOAS Wins with the Numbers

Many buildings want to decrease energy usage for a score of reasons, one of which is reducing costs. A DOAS with Energy Recovery can actually increase ventilation above minimum code standards without increasing energy bills. In looking at financial metrics to make the case, experts concur it’s a good investment, with a high internal rate of return and relatively short payback time.

Get More Insights on DOAS and How It Supports Energy and Cost Savings While Improving Air Quality

We have recently hosted a panel discussion on this topic. Experts included Nick Agopian and Alex Smith of RenewAire, joined by Rich Gerbe, CEO and Co-Founder of HIGHMARK NY LLC. Watch the on-demand webinar to learn more about DOAS technology, ventilation and indoor air quality.

RenewAire

Part of this channel

RenewAire

Energy recovery ventilation for buildings that demand clean indoor air.

Visit the channel

Your experts belong here

Every story in MarketScale Engineering & Construction starts with a company putting its project engineers, superintendents, and estimators on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners shortlist firms they already trust, and your field leaders become the reason your name is on that list.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Engineering & Construction, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Engineering & Construction: are you visible to AI?

Before they reach out, Engineering & Construction buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Engineering & Construction expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your project engineers, superintendents, and estimators into the articles, video, and social content Engineering & Construction buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Engineering & Construction Insights

Bell partnership lets Hitachi target the classes that make up roughly 90% of the North American ADT market

Bell partnership lets Hitachi target the classes that make up roughly 90% of the North American ADT market

Through a collaboration with Bell Equipment, Hitachi Construction Machinery Americas plans to add three articulated dump trucks: the ZD30, ZD45 and ZD50. The launch is scheduled for early summer 2027, and Hitachi dealers in the United States and Canada will support the trucks. Ranging from 30 to 50 tons, the models put Hitachi in the equipment classes that make up roughly 90% of the North American ADT market. The lineup gives contractors a single dealer network for excavators, wheel loaders and articulated dump trucks.

  • 01Hitachi's ZD30, ZD45, ZD50 articulated trucks launch early summer 2027 and address size classes representing about 90% of North American ADT demand
  • 02Bell Equipment, with over 26 years in the North American ADT market, manufactures the trucks while Hitachi dealers distribute and support them across the U.S. and Canada
  • 03The partnership lets Hitachi dealers quote excavators, wheel loaders, and ADTs from one network, expanding their offering.

Oct 30, 2026

Hover 3D roof measurements now flow straight into Trussi roofing estimates

Hover 3D roof measurements now flow straight into Trussi roofing estimates

Trussi, built inside Shamrock Roofing and Construction, imports Hover 3D measurements into job records and estimate fields. Hover reports bill to the contractor’s own Hover account at existing pricing, with no markup. One phone capture can also support exterior quotes in multi-trade workflows.

  • 01Hover reports bill to the contractor's own Hover account at existing prices, with no reseller markup.
  • 02One smartphone capture can feed both a roof estimate and a siding, window, door and trim takeoff, which matters most for contractors who sell more than one exterior trade.

Oct 27, 2026

Procore expands NVIDIA collaboration on construction digital twins

Procore expands NVIDIA collaboration on construction digital twins

Procore has announced closed-beta digital twin capabilities, powered by NVIDIA Omniverse libraries, that link 3D models to procurement and schedule data and to DroneDeploy site captures. How much they pay off likely depends on how current each contractor's schedule and procurement records are, especially on data center megaprojects.

  • 01Procore’s NVIDIA twin links model to schedule and procurement data, showing how a late delivery can ripple into downstream work.
  • 02A delay simulation is only as good as the delivery dates behind it: projects that track procurement outside Procore would get the 3D model with less of the ripple analysis.
  • 03Investing.com says Commissioning and an IBM Maximo integration are in beta; they could extend the twin past handover as closed beta expands.

Oct 25, 2026

Explore More Engineering & Construction Insights

Read more expert perspectives from across Engineering & Construction.

Browse Engineering & Construction Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Engineering & Construction and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512