Skip to content
‹ Back to IndustriesBuilding Management

Infographic Will Help You Start to Determine the Best Type Automatic Finishing System to Consider

Choosing an automated finishing system that best suits a facility’s specific painting needs can be challenging. However, IntelliFinishing has created a logic-based flowchart that uses easy-to-answer questions to help determine whether a simple monorail system, a power & free system (P&F), or a friction tube conveyor system (such as is offered by IntelliFinishing) aligns with…

This story was produced through MarketScale. See how Building Management teams put it to work with Customer Stories & Case Studies.

·
Share
Infographic Will Help You Start to Determine the Best Type Automatic Finishing System to Consider

Free workspace

Turn your Building Management expertise into content.

Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.

Try it Free

Choosing an automated finishing system that best suits a facility’s specific painting needs can be challenging. However, IntelliFinishing has created a logic-based flowchart that uses easy-to-answer questions to help determine whether a simple monorail system, a power & free system (P&F), or a friction tube conveyor system (such as is offered by IntelliFinishing) aligns with an operation’s respective part types and paint processes.

When Simple Questions Provide Quick Decision-Making

With simple questions such as “Do you need to powder-coat parts, liquid paint parts, or both?”, and “Will your finished parts be relatively inexpensive, or do you want to spend as little as possible on a system?”, stakeholders can use IntelliFinishing’s flowchart as a decision-making tool that rapidly assesses their actual requirements to ascertain which type of finishing system pairs to their business’ needs.

When Cost Matters and Adaptability Isn’t a Must

In situations where total system cost is the most important consideration, a traditional system, like a monorail or simple power & free system, may be entirely adequate. This is especially true when processing similar parts that use the same exact finishing recipe. And while not exceptionally adaptable, chain-based systems have proven themselves to be extremely durable and reasonably reliable. A ballpark estimate of monorail uptime standards are about 80%. Costs for monorails range from a few hundred thousand for smaller systems to multi-millions for very large systems. Despite this, there is no question that a monorail system will typically be the least costly automated system available due to its sheer simplicity and availability.

When Flexibility is Necessary

On the other hand, P&F and IntelliFinishing systems offer a much wider degree of system flexibility, but at increased costs. Much like monorails, P&F and IntelliFinishing systems include pre-finishing steps like blast, wash, dry-off, and masking, and post-finish steps like curing and cool down but both can increase the ability to process a wider variety of parts concurrently on the same system. P&F systems allow parts to drop off the chain to stop for processes or to move from one chain process to another through multiple chains and chain drives.

IntelliFinishing systems also allow parts to stop as needed or to move on track spurs to and through optional processes. Either system can accommodate many recipe options including up to providing both powder and liquid finishes on the same system. However, an IntelliFinishing System provides many more movement options that chain systems can’t match such as the ability to speed up or slow down as well as the ability to move in reverse.

When a Customizable System Must be a Part of the Solution

For finishing processes that require a high degree of customization per part or the ability to adapt as process needs change, an IntelliFinishing provides a flexible and far from traditional solution. Using a friction-driven tube conveyor that can speed up, stop, and reverse direction eliminates the chain common on monorail and P&F systems. And no chain means that changes in one area—for example, in cure time, load time, or paint time—has little to no effect on any other processes occurring simultaneously! Plus, the dirt- and dust-collecting chains that require messy lubricants, drag heat from ovens throughout the facility, and are typically very noisy are eliminated. This translates into a higher quality finish with less rework; savings on oven heating costs; and a more comfortable work environment for operators. Depending on the complexity of the P&F system, they are often as or even more expensive than an IntelliFinishing system, but they are unable to provide near the extent of flexibility available with an IntelliFinishing system.

IntelliFinishing’s use of shuttles, spurs, and deadhead turns allows for tighter use of floor space, especially for longer parts. Some clients report up to a 43% reduction in floorspace compared to same function P&F systems. Meanwhile, due to smart sensor technology, both the conveyor and most process equipment only run when the parts are present. This reduces electrical, heating, and water waste, saving costs while improving processing throughput.

When Functionality is Important and Downtime Is Not an Option

The modular design of an IntelliFinishing system also creates an easily expandable floor plan. Using modular process equipment bolted together in an easily modifiable support structure, IntelliFinishing systems offer superior functionality when compared to traditional welded-together chain systems. IntelliFinishing systems as well as changes to the system can typically be installed in a fraction of the time as alternative systems. Components and modules are typically constructed off-site and delivered ready to bolt together, reducing total onsite install time while allowing businesses to begin or change operations as quickly as possible with much less installation-related downtime.

When Control and Analytics Count

With an IntelliFinishing System, not only can manufacturers easily customize and control recipe configurations for each step of the finishing process, the system also automatically provides reporting and the ability to integrate with other database systems including most ERP systems. Recipe control, ERP integrations, and analytic data are typically not included or only rudimentarily available with most traditional chain-based systems.

Automated Finishing System Infographic

Facilities looking to add, upgrade, or replace their finishing system can use IntelliFinishing’s Automated Finishing System Infographic to determine whether an IntelliFinishing system or one of the chain-based systems best suits their finishing applications.

For more information, click here to see videos of installed systems or here to see an overview video of the benefits of an IntelliFinishing System.

To speak with a representative, call 785-309-0356 or simply fill out the Contact Us form on the IntelliFinishing website.

http://intellifinishing.com/blog/wp-content/uploads/2018/08/Intellifinishing_Infographic-3-Flow-Chart_CB_v2.2.pdfRead more at intellifinishing.com

Your experts belong here

Every story in MarketScale Building Management starts with a company putting its facilities engineers, energy managers, and service technicians on the record. Buyers are already reading this topic. The only question is whose experts they find.

Owners and facilities teams pick on trust, and your engineers turn that trust into inbound conversations.

Book DemoSee how it works15 minutes, straight to a calendar.
B2B Weekly

The week in Building Management, and sixteen other industries, every Monday.

Ten stories, one-line takes, five minutes. Free.

Building Management: are you visible to AI?

Before they reach out, Building Management buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.

Free Trial

You just read one Building Management expert. Your company is full of them.

This article was produced through MarketScale. The same platform turns your facilities engineers, energy managers, and service technicians into the articles, video, and social content Building Management buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.

NPS +73 · 1,000+ creators · 38+ countries

What your free trial includes

Hands-on access to the MarketScale platform
Media requests to your crowd, remote recording, AI writing tools
No demo required. No credit card.
For qualifying companies. Company confirmation required.

More Building Management Insights

Yale study models plant wall cutting lab CO2 to outdoor levels with 363 modules

Yale study models plant wall cutting lab CO2 to outdoor levels with 363 modules

Tuning matters most. In Yale's living-wall study, adjusting lighting and airflow direction produced a 43-fold improvement in the system's ability to remove CO2, so facilities and HVAC teams should specify living walls the way they specify air-handling equipment.

  • 01Typical HVAC systems dilute indoor CO2 with outdoor air, so they cannot bring indoor levels below outdoor levels, which typically hover at about 428 ppm in the US, according to NOAA monitoring data. A plant-based system that removes CO2 could get a room below that.
  • 02A plant wall's CO2 performance varied 43-fold depending on lighting and airflow direction, so fan orientation and light intensity belong in the spec, along with the plant count.
  • 03Before buying a plant wall for air quality, ask for measured CO2 removal per module, the direction air moves through the root zone, and the light level the figures assume.

Nov 18, 2026

ASHRAE Guideline 43: a nine-step path to a hospital VMP

ASHRAE Guideline 43: a nine-step path to a hospital VMP

Guideline 43 asks hospitals to document how their HVAC actually runs, and a new Standard 170 addendum signals a shift toward risk-assessed operations.

  • 01Standard 170 sets what an operating room must be able to do; a Ventilation Management Program records who decided what it actually does after hours, and on what evidence.
  • 02The 2027 NFPA 99 recognizes HVAC Ventilation Management Programs in Chapter 9, and a September 2026 Standard 170 addendum requires a risk assessment before operating room ventilation is adjusted.
  • 03For hospitals whose inspectors still enforce older editions, the first useful step is confirming in writing which Standard 170 edition applies, since every later rule in the program depends on it.

Nov 17, 2026

Ken Sinclair's building autonomy roadmap starts with the sensor labels

Ken Sinclair's building autonomy roadmap starts with the sensor labels

Ken Sinclair's five-step roadmap for autonomous buildings keeps existing HVAC hardware and starts by tagging every sensor point in an open ontology. His checklist starts by mapping points into one semantic graph and ends with a one-subsystem pilot where a person approves setpoint changes.

  • 01Sinclair’s step one for autonomy is to map and tag existing automation points for usability. Siemens describes its AI-Assisted Data Onboarding as automating tagging and structuring for existing buildings.
  • 02Commissioning and fault-detection programs can achieve about 20% savings in some cases, according to a sponsored Facility Executive piece on campuses.

Nov 17, 2026

Explore More Building Management Insights

Read more expert perspectives from across Building Management.

Browse Building Management Hub

For B2B teams

Your experts could be publishing here

Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Building Management and beyond.

Book a Demo

Or call us. No forms required. We pick up. 214-945-2512