# Checkmark: SmartShrink cap-band halves handheld liquid counts in Gen2X test

By MarketScale Newsroom · Published 2026-11-21 · Retail on MarketScale
Canonical: https://www.marketscale.com/industries/retail/checkpoints-rfid-bottle-cap-band-cut-liquid-inventory-time-in-half-with-gen2x-readers

> In Checkpoint's tests, SmartShrink cap tags were counted in 5.1 seconds instead of 10.6. The faster count needs Gen2X readers on the store side.

## Key points

- SmartShrink gets the tag onto the bottle at the capping line, while the halved count time depends on Gen2X readers in the store, and two different companies make those two decisions.
- Gen2X-capable cap tags still reached every container on a standard Gen2 reader, only slower, so a supplier tagging now gets full reads today and faster counts as store readers are upgraded.
- Before a line trial, confirm which reader models a retailer uses and whether they support/enable Gen2X—Checkpoint’s handheld test on ~50 one-gallon containers fell from 10.6s (Gen2) to 5.1s (Gen2X), but results may vary by device and setup.

Around 50 one-gallon liquid containers, each with an RFID band around its cap, took 10.6 seconds to count completely with a handheld reader running the standard Gen2 protocol. With the reader on Impinj's Gen2X, the same full count took 5.1 seconds.

Those figures come from Checkpoint Systems' testing of SmartShrink, a cap-mounted tag built on Impinj M800 series chips. Impinj published the results on November 19 and put out the announcement as a press release the same day, and Label & Narrow Web editor Greg Hrinya covered it. The product goes after the aisle where item-level RFID has had the hardest time. As Impinj describes it, liquids absorb radio energy, the containers are often curved, and they tend to sit on metal shelves that interfere with the signal.

For a health and beauty or home care brand facing retailer tagging requirements, the useful detail is how the gain splits. SmartShrink gets the tag onto the bottle at the capping line, while the halved count time depends on Gen2X readers in the store, and two different companies make those two decisions.

## Why the tag rides on the cap

SmartShrink builds the inlay into a shrink band that's applied during filling and capping, so the tag ends up on the cap and not on the label wrapped around the liquid. Checkpoint presents this as a way to add RFID without redesigning the label. Artwork, regulatory copy and label stock can all stay the same. The company lists a wide range of target categories: health and beauty, food and beverage, pharmaceuticals, home care, home improvement, garden and automotive.

The chip is the other half of the design. Impinj files the announcement under its M830 and M850 endpoint ICs. Both chips appear in Checkpoint's online inlay catalog, which describes the matching inlays as compliant with the industry-standard Gen2v2 protocol and also supporting Gen2X. In practice, the tags talk to any standard reader and switch to the Gen2X extensions when the reader has them.

The test bears this out. The plain Gen2 reader still picked up every container. It just took roughly twice as long. So the tag decision carries little risk: a supplier that applies Gen2X-capable bands now gets full reads on today's readers and faster counts as stores upgrade.

## What the two tests measured

Checkpoint ran two tests. The first was a close-range handheld count using an E Family handheld reader with Gen2X support. The second was stationary: how many tagged items a reader picks up within five seconds from one meter away. Impinj adds that Gen2X improved accuracy at every read distance tested, not only at one meter.

Block Field

Impinj puts the handheld result in labor terms: shorter stock checks, and less time an associate has to hold the reader in one spot. The stationary result matters more for fixed and overhead readers. Going from 74% to 89% in five seconds is a 15-point gain by simple subtraction, so fewer items get missed in a single pass. It also means 11% of items were still unread at the five-second mark, which is worth remembering when a fixed reader only gets a short window.

The test does have limits. Checkpoint ran it on its own product, using one-gallon containers, which are much bigger than many health and beauty items. The published results don't cover small bottles packed tightly on metal shelving, even though Impinj lists small tags and dense packing among the conditions Gen2X is built for.

## The reader half of the gain

The store side is moving too. RFID Journal's James Hickey reported on October 1 that Zebra Technologies is adding Gen2X support across its handhelds, sleds and fixed readers. Zebra announced the move at the RAIN in Action Summit and is rolling Gen2X across its RFID lineup through firmware upgrades. Impinj executive vice president Gahan Richardson noted that Zebra was the first company to license Gen2X. Zebra said these devices support it now:

- Handhelds: MC33 family, TC22R, TC501, TC701
- Sleds: RFD40 family, RFD90 family
- Fixed and overhead readers: FXR90, FX9600, FX7500, ATR7000

For a store operations team, that changes what it costs to get the faster counts. If the fleet already includes these models, Gen2X is a firmware update on hardware the company already owns. If it doesn't, cap-tagged products still read, just at Gen2 speed. One caution: Checkpoint's published numbers came from an E Family handheld, so the same figures haven't been published for Zebra devices.

## Retail tagging reaches the liquids aisle

Impinj ties the launch directly to retailers, Walmart among them, expanding RAIN RFID into more product categories. As those programs grow, suppliers need tags that work on a wider range of products. Louis Parker, RFID market development manager at Checkpoint, describes SmartShrink as a way to meet retail tagging mandates without disrupting production, especially for products that have been hardest to tag.

Smithers sees the same direction in its report From Shelf to System, written for Packaging Innovations & Empack 2027 and covered by Label & Narrow Web's Steve Katz. The report points to Walmart deploying Avery Dennison RFID in fresh food to improve inventory accuracy and cut waste. In its track-and-trace analysis, Smithers forecasts RFID growing 11.6% a year and passing $1 billion by 2030. Taken together, fresh food and liquids suggest that retailers are now bringing into RFID programs the categories that physics used to keep out. Zebra's announcement makes the same point, naming grocery, health and beauty, and pharmaceuticals as categories that used to be hard to tag and are now being added.

Block Field

Some questions belong in any supplier trial. Can the shrink band be applied at current line speeds on the filling and capping equipment already in place? How do reads hold up on the brand's own container sizes and fill levels, on the kind of shelving its retailers actually use? And does the inlay chosen match the protocol listings retailers ask for? Checkpoint's inlay finder lets buyers filter by chip, protocol and compatible reader type, which makes that last check quick.

The next signal to watch is store-level data. Until a retailer publishes results from tagged liquids on its own shelves, the 52% figure describes Checkpoint's controlled test on gallon containers, which is a strong benchmark for a supplier to set against its own trial.

## Sources

- [Checkpoint, Impinj extend inventory visibility to liquid products](https://www.labelandnarrowweb.com/breaking-news/checkpoint-impinj-extend-inventory-visibility-to-liquid-products/)
- [RFID Tagging for Liquid Inventory: Gen2X SmartShrink - Impinj, Inc.](https://www.impinj.com/library/blog/rfid-tagging-checkpoint-smartshrink-liquid-products-gen2x)
- [Press Releases - Packaging Dive](https://www.packagingdive.com/press-release/)
- [RFID Inlay Finder - Checkpoint Systems](https://checkpointsystems.com/rfid-solutions/rfid-inlay-finder/)
- [Zebra Technologies Upgrades RFID Readers with Impinj Gen2X](https://www.rfidjournal.com/news/zebra-technologies-upgrades-rfid-readers-with-impinj-gen2x/225679/)
- [Smithers: E-commerce packaging market to reach $105.2 billion by 2031 - Label and Narrow Web](https://www.labelandnarrowweb.com/breaking-news/smithers-e-commerce-packaging-market-to-reach-105-2-billion-by-2031/)

Tags: Checkpoint SmartShrink, Impinj Gen2X, Impinj M800, Zebra Technologies, RAIN RFID, Liquid product tagging

---
Source: MarketScale, https://www.marketscale.com/industries/retail/checkpoints-rfid-bottle-cap-band-cut-liquid-inventory-time-in-half-with-gen2x-readers. Published for AI indexing and citation; cite the canonical URL. Site guide for agents: https://www.marketscale.com/llms.txt
