# Rockwell's Emulate3D adds NVIDIA Omniverse to test whole factories before startup

By MarketScale Newsroom · Published 2026-11-18 · Industrial IoT on MarketScale
Canonical: https://www.marketscale.com/industries/industrial-iot/rockwells-emulate3d-adds-nvidia-omniverse-to-test-whole-factories-before-startup

> Rockwell's Emulate3D now runs on NVIDIA Omniverse, RTX and OpenUSD for factory-scale virtual commissioning. The harder call is how much plant to model.

## Key points

- Emulate3D's core job hasn't changed: it hands a real controller a convincing virtual plant so the logic gets debugged before startup. What changed is how much plant it can hand over.
- Software is the small part of a digital twin’s cost; the bigger cost is the engineers who build and run it. With factory-scale models, staffing and scope decisions need to be budgeted alongside the license.
- ABB has published performance claims for its Omniverse-based RobotStudio HyperReality. Treat those claims as a reminder to ask any simulation vendor for measurable, application-specific evidence—without assuming ABB’s results translate to factory-scale Emulate3D projects.

Emulate3D exists to fool a controller. Engineers wire a PLC to a physics-based 3D model of the machinery. The controller sends commands, the model sends sensor signals back, and the logic gets debugged before any steel reaches the floor. On Nov. 16, Rockwell Automation said that model can now be a whole factory.

Rockwell has built NVIDIA Omniverse, NVIDIA RTX rendering and the OpenUSD scene framework into Emulate3D to support factory-scale visualization and virtual commissioning. The details come from the company's announcement and from Automation World, which reported it the same day. The pitch is earlier testing: model and tune production environments sooner in design, catch problems, and lower commissioning risk before equipment ships. Matheus Bulho, Rockwell's senior vice president of Software & Control, framed it around AI. He said the combination lets customers simulate larger, more complex systems and gives AI systems a place to learn and check decisions before deployment.

For the controls lead or plant project manager scoping a new line, that changes the planning question. If the tool can hold an entire plant, someone has to decide how much of the plant deserves a model, and who on the team will build it.

## Three NVIDIA layers on a controls-testing core

Rockwell acquired Emulate3D in 2019, according to ARC Advisory Group, which has followed the product since. ARC describes its traditional use as simulating machines, material-handling systems and production environments to test automation logic. In a 2024 Automation World interview, Michael Sarvo, Rockwell's digital design business development manager for North America, drew a useful line. Simulation predicts theoretical performance early, while design choices are still open. The digital twin used for virtual commissioning is dimensionally accurate, physics-based and connected to the actual control system through its inputs and outputs.

Craig Resnick's ARC analysis splits the new additions by job. OpenUSD provides a common framework for describing and exchanging 3D assets and scene data. RTX adds accelerated rendering. Omniverse supplies the base for visualization and simulation workflows that can scale. Together, ARC says, they let teams evaluate production systems, controls, layouts and operating strategies in one model, where Emulate3D projects previously worked machine by machine.

Block Field

Rockwell also says the expanded platform produces deterministic outcomes. In plain terms, the same inputs should give the same result on every run. That repeatability is what lets an engineer compare one proposed change, AI-generated or not, against another with any confidence.

The release also fits into a larger toolchain. ARC notes that FactoryTalk Conductor, which Rockwell introduced in 2026, coordinates AI agents and engineering workflows across Studio 5000 Logix Designer, Logix Echo, Emulate3D and FactoryTalk Optix. That puts the factory model in the same workflow as the PLC program and the emulated controller. ARC also points out that Rockwell had previously announced plans to bring Omniverse into Emulate3D, so this week's news is that plan shipping as product.

## What earlier Emulate3D projects paid back

Rockwell's case for virtual commissioning predates the NVIDIA work. In the same 2024 interview, Sarvo described RidgeTech Automation commissioning material-handling systems for two 100,000-square-foot vertical farms. The equipment included automatic storage and retrieval units more than 40 feet tall, machines with no room for error at first startup. RidgeTech proved out the logic in Emulate3D beforehand and ran the operator interface alongside the twin to settle client concerns before shipment. That shortened the initial commissioning window.

GA Pet Food Partners went a step further. It wired an Emulate3D twin of its new automation into its manufacturing execution system to test and tune the MES before go-live, and estimated the project would otherwise have run three to four months longer.

In this week's release, GE Appliances provides the customer view. Lora Green, its senior manager for Advanced Manufacturing Simulation, said virtual testing becomes more valuable as manufacturing systems grow more complex. In her account, better simulation lets her team evaluate ideas earlier and go into deployment with more confidence.

Both of Sarvo's examples were system-sized: one storage and conveyance package, and one automation upgrade tied to an MES. A factory-scale model suggests the next gains sit in the interactions between systems. For operators whose startup trouble tends to appear where separately supplied systems meet, a plant-wide model is where the extra fidelity would earn its keep. For a single-machine retrofit, the scope Emulate3D already covered may be enough.

## ABB's robot-cell version of the bet

Rockwell isn't the only automation supplier building its models on NVIDIA. Design World's Puja Mitra reported in March that ABB Robotics was integrating Omniverse libraries into RobotStudio, its robot programming and simulation software, under the name RobotStudio HyperReality. ABB focuses on synthetic data for training physical AI models. Its virtual controller runs the same firmware as the physical robot, which tightens the match between simulated and real behavior. ABB also published performance claims for the tool.

Block Field

Foxconn is piloting HyperReality on consumer electronics assembly. Many device variants and small, delicate metal parts make that work hard to set up, so Foxconn trains robots in a virtual environment on synthetic data covering different production scenarios before they reach the line. In March, ABB said select customers were testing the software ahead of a broader release to RobotStudio users in the second half of 2026.

The two launches approach the same problem from opposite ends: ABB from the robot cell outward, Rockwell from the control system and plant layout. Siemens announced plans in 2022 to connect its Xcelerator platform to Omniverse, Robotics 24/7 reported, so three large automation suppliers now feed models into the same NVIDIA layer. That could matter for plants running mixed equipment if OpenUSD assets actually move cleanly between vendor tools. Buyers should test that in a pilot before relying on it.

There's a limit to the comparison. ABB's percentages are ceilings for ABB's robot applications, and they say nothing directly about a factory-scale Emulate3D project. They show what kind of evidence to ask for. They are not a number to drop into a Rockwell business case.

## Model scope and staffing decide payback

Bigger models are also where Rockwell's own guidance urges restraint. In 2024, Sarvo warned that digital twins put return on investment at risk when engineers go too deep. In his account, teams that build a twin of everything without a clear purpose end up with a model that is overly complex and costly to engineer, and that may still miss the insight it was built for. Software that can hold a full factory makes that temptation easier to act on.

Rockwell's own digital-design lead has argued that the software is the small part of a digital twin's cost; the engineers who can build and run one are the big part. Sarvo said twin modeling works when it makes up most of a person's job, as opposed to an occasional assignment, and that this takes real organizational commitment. For a plant adding factory-scale models to its project plans, that staffing decision belongs in the budget alongside the license.

Fidelity has a second limit. Sarvo's linear motor example makes it concrete: a commissioning twin needs the motor to respond to control signals and report its motion, while a study of the same motor's thermal behavior needs a different model entirely. A plant-scale commissioning model tells a team whether the logic and the handoffs work. It won't answer every engineering question about the equipment inside it.

Block Field

The signal to watch is the first customer that puts a number on a plant-scale Emulate3D project, the way GA Pet Food Partners did with its three-to-four-month estimate for one automation upgrade. Until then, each plant has to run its own math: engineering hours spent on the model against startup days saved.

## Sources

- [Rockwell Automation Integrates NVIDIA Omniverse Into Emulate3D](https://www.automationworld.com/analytics/news/55419158/rockwell-automation-integrates-nvidia-omniverse-into-emulate3d) (Automation World)
- [Rockwell Automation Integrates NVIDIA Omniverse into Emulate3D ...](https://www.prnewswire.com/news-releases/rockwell-automation-integrates-nvidia-omniverse-into-emulate3d-to-advance-industrial-simulation-and-ai-powered-factory-design-302940633.html) (PR Newswire)
- [Rockwell Automation Integrates NVIDIA Omniverse into Emulate3D](https://www.arcweb.com/blog/rockwell-automation-integrates-nvidia-omniverse-emulate3d)
- [Rockwell Automation: Deciphering Digital Twins and Simulation ...](https://www.automationworld.com/design/article/33036484/rockwell-automation-deciphering-digital-twins-and-simulation) (Automation World)
- [ABB integrates NVIDIA Omniverse libraries into RobotStudio](https://www.designworldonline.com/abb-integrates-nvidia-omniverse-libraries-into-robotstudio/) (Design World)
- [Siemens Xcelerator and NVIDIA Omniverse to Accelerate Digital ...](https://www.robotics247.com/article/siemens_xcelerator_nvidia_omniverse_accelerate_digital_twins_manufacturing) (Robotics 24/7)

Tags: Rockwell Automation, Emulate3D, NVIDIA Omniverse, OpenUSD, virtual commissioning, ABB RobotStudio HyperReality

---
Source: MarketScale, https://www.marketscale.com/industries/industrial-iot/rockwells-emulate3d-adds-nvidia-omniverse-to-test-whole-factories-before-startup. Published for AI indexing and citation; cite the canonical URL. Site guide for agents: https://www.marketscale.com/llms.txt
