# PSE&G cut 38.15 MW in a single one-hour demand response event

By MarketScale Newsroom · Published 2026-11-21 · Energy on MarketScale
Canonical: https://www.marketscale.com/industries/energy/psegs-demand-response-customers-cut-38-megawatts-in-one-summer-hour

> PSE&G's demand response enrollment nearly doubled to 45,000 customers in 2026, and one event cut 38.15 MW. Here is what that works out to per customer.

## Key points

- Averaged across ~45,000 enrollments, the 38.15 MW one-hour event implies under 1 kW per enrolled customer (a blended estimate, not per-participant performance).
- Enrollment grew from about 23,000 customers and just over 30,000 devices to about 45,000 customers and 60,000 devices, which suggests most of the growth came from new households.
- For operators, the question is whether demand reductions keep pace with enrollment as the pool grows, which could shape how much a virtual power plant can rely on it.

PSE&G asked New Jersey customers to ease off the grid 16 times between June 1 and Oct. 30. In one of those events, a single one-hour call, they cut 38.15 megawatts. The utility compares that to taking about 18,000 homes off the grid for the hour.

The season ended with nearly 45,000 customers enrolled, almost double the roughly 23,000 at the close of 2025, PSE&G said in a Nov. 17 release distributed by PR Newswire, describing participation as growing steadily since the programs launched. Enrolled devices doubled as well, from just over 30,000 to about 60,000. Headcount is the easy part to report. Anyone counting on residential flexibility, whether a utility program manager, a thermostat or EV charger maker, or a facilities lead deciding whether to enroll, needs to know what a pool this size delivers when the utility actually calls on it.

## What 45,000 enrollments add up to

Divide 38.15 megawatts by 45,000 enrolled customers and the answer is under 1 kilowatt each, which is the number a virtual power plant planner should actually be tracking. By our arithmetic it comes to roughly 0.85 kW per enrolled customer. The utility's own comparison of 18,000 homes implies a little over 2 kW per house, again an average derived from that equivalence. The release does not say how many enrolled customers took part in that event, so the lower per-enrollee figure is a blended average across the whole pool, not a measured response per participant.

The device count tells a second story. About 60,000 devices across 45,000 customers comes to roughly 1.3 devices per household, and last year's figures of 30,000 and 23,000 give almost the same ratio. That suggests the year's growth came mainly from new households signing up rather than existing participants adding more hardware. For a program manager, that distinction matters: adding households widens the pool, while adding devices per household deepens what each enrollment can deliver.

Block Field

## Hitting the hours that count

The five peak hours may be the most telling result. PSE&G says its programs were dispatched during each of the five highest peak hours on PJM, the regional grid New Jersey belongs to. Across 16 events, landing in all five suggests the utility's event calls lined up with the hours of highest regional demand, the hours a peak reduction program exists to cover. Lauren Thomas, PSE&G's vice president of Clean Energy Solutions for Customer Solutions, said the larger enrollment gives the utility a bigger pool to call on when demand peaks.

> The growth we've seen in the program enables more flexibility on the grid during critical peak demand periods., Lauren Thomas, vice president, Clean Energy Solutions, Customer Solutions, PSE&G

Sixteen calls across a 152-day season works out, by our count, to roughly one every nine or ten days. That cadence is the rhythm enrolled households actually live with. Under FlexPower, each call means a thermostat, charger or water heater gets adjusted; under SmartFlex, each call is another chance to earn.

PSE&G reported the 38.15 MW figure as the result of one event, not as a season average, so planners could treat it as demonstrated capacity rather than the typical yield of every call.

## Paying for devices versus paying for kilowatt-hours

PSE&G runs two programs with different payment models. FlexPower works with eligible smart devices: smart thermostats, electric vehicles and chargers, and certain electric water heaters, all adjusted temporarily during scheduled events. Customers get a $50 prepaid gift card for each new device type they enroll and $25 for every year they stay in the program.

Under SmartFlex, customers cut usage themselves during events, with or without a smart device, and earn $1.25 for every kilowatt-hour saved. That model includes households with no connected hardware, and it pays only for the energy reduction that actually shows up.

For a sense of scale, a household matching the pool's blended 0.85 kW average through a one-hour event would earn about $1.06 at the SmartFlex rate, by our arithmetic. FlexPower's $25 annual payment, by contrast, arrives for staying enrolled, independent of any single event. One model rewards presence and the other rewards performance, a split that could shape which customers each program attracts.

For device makers, the per-device-type structure has a practical consequence. Because the $50 card attaches to each new device type rather than to the enrollment as a whole, bringing another device category into the home could be one way customers add value. Set against the flat 1.3 devices per household, that suggests the program may have room to deepen as well as widen.

Block Field

## Groundwork for New Jersey's virtual power plant

PSE&G, New Jersey's oldest and largest gas and electric delivery public utility, says what it learns from managing customer resources through demand response and its other customer programs will feed its work on peak demand as New Jersey advances its virtual power plant program and other energy management solutions. For planners building virtual power plants, two seasons of dispatch on about 60,000 devices could offer a useful operating record, one that may help show how devices respond when called and whether customers stay enrolled.

The utility also positions its Time of Use rate as the everyday companion to these programs, since TOU shifts usage year round while demand response targets the few hours of highest demand. That pairing suggests two layers of flexibility working together: a daily price signal underneath, and a handful of dispatched hours on top.

For aggregators and equipment makers planning around New Jersey's virtual power plant effort, the eligible device list shows which categories already have a utility enrollment path at scale: thermostats, EVs and chargers, and some electric water heaters. For commercial and multifamily operators, the more useful benchmark is the per-customer yield, because it shows what enrolling a household is worth in kilowatts.

The 2027 season will test that benchmark. If enrollment doubles again and the best-hour reduction roughly doubles with it, the 0.85 kW yield holds and the pool scales cleanly. If the megawatts lag the headcount, the newer enrollees are responding less than the early ones, and that is the number a virtual power plant planner should watch.

## Sources

- [PSE&G Demand Response Participation Nearly Doubles as Second Season Concludes](https://finance.yahoo.com/energy/articles/pse-g-demand-response-participation-133000002.html)
- [PSE&G Demand Response Participation Nearly Doubles as ...](https://www.prnewswire.com/news-releases/pseg-demand-response-participation-nearly-doubles-as-second-season-concludes-302942115.html) (PR Newswire)

Tags: PSE&G, FlexPower, SmartFlex, demand response, PJM, virtual power plants

---
Source: MarketScale, https://www.marketscale.com/industries/energy/psegs-demand-response-customers-cut-38-megawatts-in-one-summer-hour. Published for AI indexing and citation; cite the canonical URL. Site guide for agents: https://www.marketscale.com/llms.txt
