# Styrvel licenses NeoMesh to cut retrofit wiring for radiator controls

By MarketScale Newsroom · Published 2026-11-22 · Building Management on MarketScale
Canonical: https://www.marketscale.com/industries/building-management/styrvels-neomesh-deal-brings-radiator-controls-to-existing-buildings-without-new-wiring

> Styrvel will use NeoCortec's NeoMesh to connect battery-powered radiator thermostats and sensors in existing buildings, with no new cable and no repeaters.

## Key points

- In occupied buildings, retrofit costs are often driven by cabling or dedicated repeaters. NeoMesh’s pitch is a self-organizing mesh where battery devices relay traffic, aiming to avoid that extra infrastructure.
- Which wireless retrofit fits depends on what is already in the walls.
- No field results have been published for this kind of platform yet. Battery-life data from buildings already in service, and a clear answer on who replaces the cells, should be part of any pilot.

Picture radiator thermostats and room sensors running on batteries and reporting to a single gateway, with no new cable pulled through the walls and no repeaters fixed to the ceiling. NeoCortec announced that Styrvel, a Danish developer of a wireless retrofit building automation platform for existing commercial buildings, has signed a software licensing agreement for NeoMesh, NeoCortec's ultra-low-power wireless mesh protocol stack. According to SmartBuildingMag, the agreement was announced at electronica 2026, which ran November 10 to 13 at Messe München.

In Styrvel's platform, NeoMesh is the communication layer between the battery-powered devices and the building gateway. That comes from NeoCortec's announcement, which EE Journal published on November 13 and The Volt Post covered a day earlier. The bet behind the deal is the more useful part. In heating and indoor-climate control for buildings that already exist, much of the cost and disruption sits in the network, so Styrvel chose to solve the network first.

## How a mesh removes the repeater line item

SmartBuildingMag's write-up notes that bringing automation into commercial buildings already in use typically requires new communication infrastructure. That can mean cabling or, for many wireless systems, dedicated repeaters, and either option raises installation effort and cost. That is why installation cost, scalability and battery life head the list when a retrofit team chooses a wireless technology.

NeoMesh's answer is a self-organizing mesh. Each device relays messages for its neighbors, so coverage grows as thermostats and sensors go in, and no separate layer of infrastructure is needed. NeoCortec says the stack can support large numbers of battery-powered nodes this way. The company also says it built NeoMesh from scratch to get past the limits of Zigbee, Z-Wave, Bluetooth and Thread on device count, range and power draw. Those comparisons are NeoCortec's own, and the announcement includes no benchmark data to check them.

Block Field

NeoCortec has been working on this problem for a while. It was founded in 2007 to develop and patent innovations in wireless sensor networks, and NeoMesh is its main product: a protocol embedded in smart devices so they can talk to each other and to the cloud. The company describes its goal as making non-smart and large buildings smarter, with "easy upgrade without cabling." The stack is also bi-directional, so traffic runs both ways across the mesh. That's the difference between control and monitoring: the gateway has to reach the thermostat, not just hear from it.

Block Field

For Styrvel, the payoff is commercial as much as technical. Founder and CEO Cato Skibsted Fagermo said NeoMesh's main value is that it lets the company build large-scale automation without adding communication infrastructure throughout a building. He tied that to a goal of making retrofit control simple and cheap enough for a much larger share of existing buildings. NeoCortec CEO Thomas Steen Halkier called mesh the most cost-effective way to build intelligent heating and climate infrastructure, especially in buildings that are already standing.

In an occupied building, every cable run and every repeater means labor, disruption and cost, which is why the wireless layer can decide whether a retrofit pays off at all. According to SmartBuildingMag, running sensors and thermostats on batteries lets installers put them in spots with no power supply, while a self-organising network makes commissioning and later expansion simpler.

You see the same pattern outside building controls. Writing in EC&M in October, Legrand's Aaron Vigliotti noted that in most commercial EV charging developments the charger is only a fraction of the total investment. Civil site work such as excavation, underground conduit and repaving makes up most of the labor and cost. It's a different trade with the same lesson. The infrastructure around a device can cost more than the device, and that infrastructure is exactly what Styrvel is trying to design out.

## LumenRadio takes a different wireless path

The Styrvel deal comes a few weeks after ACHR News reported the 2027 AHR Expo Innovation Award winners. ACHR News lists LumenRadio's W-BACnet Compact as the winner in the Building Automation category and describes it as the industry's smallest wireless BACnet MS/TP cable replacement, enabling retrofits without running RS485 wiring. It features snap-on installation, Bluetooth commissioning, auto-baud detection and LumenRadio's interference-resistant wireless mesh. Entries are evaluated by a panel of third-party judges who are ASHRAE members and assessed on innovative design, creativity, real-world application and potential market impact.

The field gives the win some weight. The publication's October 27 report says the awards draw hundreds of submissions each year across 10 categories. In Building Automation, the finalists alongside LumenRadio were Delta Intelligent Building Technologies with Building Canvas and Schneider Electric with EcoStruxure Foresight Operation. ACHR's description says the W-BACnet Compact "dramatically reduces installation time, cost, and disruption," which are the same burdens SmartBuildingMag lists for retrofits generally. With real-world application one of the four judging criteria, a product sold on cutting installation burden fits that test squarely.

Both products avoid the same cable, but they start from different buildings:

- LumenRadio W-BACnet Compact: a wireless BACnet MS/TP cable replacement that enables retrofits without running RS485 wiring, while preserving full BACnet interoperability.
- Styrvel on NeoMesh: adds battery-powered room sensors and electronic radiator thermostats that report to a gateway over a self-organizing mesh, aimed at heating and indoor-climate control in existing commercial buildings.

Commissioning is where the two pitches meet. LumenRadio relies on Bluetooth commissioning and auto-baud detection to speed setup. SmartBuildingMag credits NeoMesh's self-organising network with making commissioning simpler. Either way, the hours a technician spends getting devices talking count as part of the wiring problem, not an afterthought.

Two products don't make a market. Still, an award-winning cable replacement and a licensing deal built on avoiding cable suggest that retrofit vendors see wiring as the main obstacle to automating existing buildings. AHR Expo show manager Jeff Stevens framed this year's winners as serving energy efficiency, compliance, cost-effectiveness and better equipment performance, and cost-effectiveness is the goal both of these products lean on hardest. For facilities teams running BACnet MS/TP, a cable replacement like LumenRadio's could be the simpler fit. For operators of radiator-heated buildings that want room-level control, a battery-powered platform like Styrvel's could be the closer match.

## Where the battery bill shows up

The strongest objection to the wireless pitch is that it moves cost somewhere else instead of removing it. A cabled sensor never needs a battery. A battery-powered thermostat eventually needs someone to visit it, and a building with hundreds of them could turn cell replacement into a regular maintenance task. The announcement itself names battery lifetime as one of the three requirements that matter most in a retrofit, so buyers have good reason to ask about it.

NeoCortec's design answer is in how it describes the stack: ultra-low-power, and built to beat other protocols on power consumption. Those are the right claims to test. In a mesh, every battery-powered node relays its neighbors' messages as well as sending its own, so a device's position in the network could affect how fast it drains its cells.

Hard evidence is thin so far. SmartBuildingMag notes plainly that no quantified results have been published, and that the expected benefits follow from the architecture rather than from measured field data. That's normal for a licensing deal announced at a components trade show. It also means a building owner considering a pilot should write the measurements into the pilot plan, rather than hoping the vendor reports them.

Block Field

## Chicago in January, field data after

The next fixed date belongs to the award side of this story. ACHR News reports that the 2027 winners will be celebrated at AHR Expo, which ASHRAE and AHRI co-sponsor, from January 25 to 27, 2027, in Chicago, running alongside ASHRAE's Winter Conference. One overall 2027 Product of the Year, selected from the 10 category winners, will be announced at a special reception in Chicago. The honor is awarded for exceptional leadership in HVACR innovation, and LumenRadio, exhibiting at booth S6049, is in that pool.

A wireless cable replacement taking the top prize would show how seriously the HVACR establishment rates the retrofit wiring problem. Even so, an award reflects judges' assessment of design and likely impact. It isn't the same as performance data from buildings in operation.

For Styrvel and NeoCortec, the signal to watch is the first set of published results from occupied buildings: battery life, how many devices a single gateway handles, and how installation time compares with a cabled job. Those figures would show whether a no-cable, no-repeater mesh delivers on Fagermo's aim of making automation worth installing in many more existing buildings.

## Sources

- [Developer of wireless retrofit building automation platform for existing commercial buildings signs NeoMesh wireless protocol stack licensing agreement](https://www.eejournal.com/industry_news/developer-of-wireless-retrofit-building-automation-platform-for-existing-commercial-buildings-signs-neomesh-wireless-protocol-stack-licensing-agreement/)
- [Wireless Mesh Networking for Retrofit Building Automation](https://www.smartbuildingmag.com/news/117338-wireless-mesh-networking-for-retrofit-building-automation)
- [NeoMesh will link Styrvel battery-powered Device](https://thevoltpost.com/neomesh-will-link-styrvel-battery-powered-device/)
- [AHR Expo Reveals 2027's Top HVACR Innovations](https://www.achrnews.com/articles/166913-ahr-expo-reveals-2027s-top-hvacr-innovations) (ACHR News)

Tags: Styrvel, NeoCortec, NeoMesh, LumenRadio W-BACnet Compact, wireless retrofit building automation

---
Source: MarketScale, https://www.marketscale.com/industries/building-management/styrvels-neomesh-deal-brings-radiator-controls-to-existing-buildings-without-new-wiring. Published for AI indexing and citation; cite the canonical URL. Site guide for agents: https://www.marketscale.com/llms.txt
