# Homes and Hearts Are On The Way: Where Does 3D Printing Stand Today?

Published 2018-08-23 · Updated 2026-03-26 · Architecture & Design on MarketScale
Canonical: https://www.marketscale.com/industries/architecture-and-design/homes-and-heart-are-on-the-way-where-does-3d-printing-stand-today

> It may not be completely visible to the public yet, but perhaps no other area in the design and architecture industry has made as big of strides as 3D printing has in the last decade. Significant investment has been made in the technology, including by NASA, which is using the innovation to recreate lunar landing…

It may not be completely visible to the public yet, but perhaps no other area in the design and architecture industry has made as big of strides as 3D printing has in the last decade. Significant investment has been made in the technology, including by NASA, which is using the innovation to recreate [lunar landing locations and models of space crafts](https://nasa3d.arc.nasa.gov/models/printable).

Although there is still significant developments that need to occur for 3D printing to be accepted into mainstream architectural practices, it is still being implemented commercially today.

In the athletic shoe market, material is a massive differentiating factor among consumers. [Under Armour is venturing into 3D printed materials](https://www.underarmour.com/en-us/3d-architech) to separate itself from Nike and Adidas, its two largest competitors.

https://twitter.com/decorhomesclub/status/1032487113181343744

Homes present perhaps the biggest opportunity for 3D printing. While it is still in its primitive stages, [3D printed homes](http://fortune.com/2018/04/22/3d-printed-homes/) have been developed and have the potential to erect homes in less than one week’s time while doing so for a much lower cost than traditional construction firms. With a labor shortage in the construction industry, 3D printing could fundamentally change the way homes are designed and constructed.

https://twitter.com/Eng\_Lancer/status/1031125642069168128

As of today, the medical field may have made the biggest strides with 3D printing technology. Particularly in education and training, 3D models of bones, ligaments and organs have already become popular in this field. In the near future, many medical professionals are confident that organs will be able to be successfully replaced with [printed versions](https://www.ft.com/content/67e3ab88-f56f-11e7-a4c9-bbdefa4f210b), extending lives.

> News from [#SIR18LA](https://twitter.com/hashtag/SIR18LA?src=hash&ref_src=twsrc%5Etfw): Researchers at [@StanfordMed](https://twitter.com/StanfordMed?ref_src=twsrc%5Etfw) have created 3D-printed models of groin vasculature with texture resembling real tissue for use in training [#medstudents](https://twitter.com/hashtag/medstudents?src=hash&ref_src=twsrc%5Etfw) on ultrasound-guided interventional procedures. [https://t.co/QoDFlbZIad](https://t.co/QoDFlbZIad) [pic.twitter.com/nIsQPVbwUm](https://t.co/nIsQPVbwUm)
> — Society of Interventional Radiology (@SIRspecialists) [April 19, 2018](https://twitter.com/SIRspecialists/status/986955830246461441?ref_src=twsrc%5Etfw)

> Inside the effort to print lungs and breathe life into them with stem cells[https://t.co/yC67bVEa1Q](https://t.co/yC67bVEa1Q) 3D printed lungs sound a bit far fetched, but 3D printing trachea and lung tissue are absolutely possible. [#digitalhealth](https://twitter.com/hashtag/digitalhealth?src=hash&ref_src=twsrc%5Etfw) [#3dprinting](https://twitter.com/hashtag/3dprinting?src=hash&ref_src=twsrc%5Etfw) [pic.twitter.com/ajlB7z0jYB](https://t.co/ajlB7z0jYB)
> — Berci Meskó, MD, PhD (@Berci) [July 6, 2018](https://twitter.com/Berci/status/1015149338589388800?ref_src=twsrc%5Etfw)

Transportation has also been improved thanks to 3D printing. Starting with small additions like better designed bumpers and fenders, the industry is already looking at rethinking how cars and buses are manufactured. At the University of Buffalo, [this bus](https://all3dp.com/4/autonomous-3d-printed-olli-bus-undergoing-testing-university-buffalo/) is being tested to see the practicality of 3D printing in public transit.

> Olli, the [#3Dprinted](https://twitter.com/hashtag/3Dprinted?src=hash&ref_src=twsrc%5Etfw) bus developed by [@LocalMotors](https://twitter.com/localmotors?ref_src=twsrc%5Etfw), participant of [#In3dustry](https://twitter.com/hashtag/In3dustry?src=hash&ref_src=twsrc%5Etfw) 2017, is undergoing testing at the [@UBuffalo](https://twitter.com/UBuffalo?ref_src=twsrc%5Etfw) [https://t.co/4kkYczTttW](https://t.co/4kkYczTttW) [@All3DP](https://twitter.com/All3DP?ref_src=twsrc%5Etfw) [#Automotive](https://twitter.com/hashtag/Automotive?src=hash&ref_src=twsrc%5Etfw) [pic.twitter.com/igS7387LxX](https://t.co/igS7387LxX)
> — INDUSTRY From Needs to Solutions (@industry\_arena) [August 17, 2018](https://twitter.com/industry_arena/status/1030383801573298176?ref_src=twsrc%5Etfw)

> Learning [@localmotors](https://twitter.com/localmotors?ref_src=twsrc%5Etfw) for [#AutonomousVehicles](https://twitter.com/hashtag/AutonomousVehicles?src=hash&ref_src=twsrc%5Etfw) conference. Wish I could drive this "Strati" – world's first [#3Dprint](https://twitter.com/hashtag/3Dprint?src=hash&ref_src=twsrc%5Etfw) car – made in 27 hours [pic.twitter.com/EWaKP0am5w](https://t.co/EWaKP0am5w)
> — Mark A. Cleveland (@MarkACleveland) [April 11, 2017](https://twitter.com/MarkACleveland/status/851902349207629824?ref_src=twsrc%5Etfw)

Animals, like humans can benefit from artificial limbs and organs. This alligator is the recipient of a 3D printed tail, and entire underwater ecosystems are being restored and developed with man-made models.

> Mr. Stubbs, the disabled alligator, gets a prosthetic tail, courtesy of 3D printing. [@NatGeo](https://twitter.com/NatGeo?ref_src=twsrc%5Etfw) [#3Dprinting](https://twitter.com/hashtag/3Dprinting?src=hash&ref_src=twsrc%5Etfw) [https://t.co/MF6RnLFagh](https://t.co/MF6RnLFagh) [pic.twitter.com/s194lzVJm9](https://t.co/s194lzVJm9)
> — Stephanie M (@Moosecorn) [August 23, 2018](https://twitter.com/Moosecorn/status/1032665318211051520?ref_src=twsrc%5Etfw)

> In efforts to preserve the aquatic ecosystem – world's largest 3D printed reef submerged in the Maldives [https://t.co/Wu1gyJgZZ0](https://t.co/Wu1gyJgZZ0)[#3Dprinting](https://twitter.com/hashtag/3Dprinting?src=hash&ref_src=twsrc%5Etfw) [#additivemanufacturing](https://twitter.com/hashtag/additivemanufacturing?src=hash&ref_src=twsrc%5Etfw) [#environment](https://twitter.com/hashtag/environment?src=hash&ref_src=twsrc%5Etfw) [#climatechange](https://twitter.com/hashtag/climatechange?src=hash&ref_src=twsrc%5Etfw) [#ecosystem](https://twitter.com/hashtag/ecosystem?src=hash&ref_src=twsrc%5Etfw) [#coralreef](https://twitter.com/hashtag/coralreef?src=hash&ref_src=twsrc%5Etfw) [pic.twitter.com/fT1HeMJjxz](https://t.co/fT1HeMJjxz)
> — 3dpbm (@3dpbmPulse) [August 21, 2018](https://twitter.com/3dpbmPulse/status/1031859731781046272?ref_src=twsrc%5Etfw)

This technology is still in its infancy, but as more investment is made, especially by organizations like NASA and private manufacturers, it will quickly implement itself into every facet of daily life.

For the latest news, videos, and podcasts in the AEC Industry, be sure to subscribe to our industry publication.

**Follow us on social media for the latest updates in B2B!**

Twitter – [@AECMKSL](http://twitter.com/AECMKSL)

Facebook – [facebook.com/marketscale](http://facebook.com/marketscale)

LinkedIn – [linkedin.com/company/marketscale](http://linkedin.com/company/marketscale)

---
Source: MarketScale, https://www.marketscale.com/industries/architecture-and-design/homes-and-heart-are-on-the-way-where-does-3d-printing-stand-today. Published for AI indexing and citation; cite the canonical URL. Site guide for agents: https://www.marketscale.com/llms.txt